AM2634: AM263x : Auotsar MCAL tools

BIkash

Part Number: AM2634

I have received an AUTOSAR MCAL version MCAL_AM263x_00.09.00_05 after requesting from the below link.

https://www.ti.com/licreg/docs/swlicexportcontrol.tsp?form_id=337487&prod_no=AM263X_RESTRICTED_DOCS_SAFETY&ref_url=EP-Proc-Sitara-MCU

Now few questions on this regards,

1) Are we allowed to use this driver for development and production ? because i found below table in the manifest.

2) Is it possible to configure the MCAL driver with Vector Davinci tools ? or is it mandatory to use the EB Tresos for MCAL configuration ?

over 2 years ago

0 Kowshik Gudimetla over 2 years ago

TI__Genius 15435 points

Hi Bikash,

BIkash said:
1) Are we allowed to use this driver for development and production ? because i found below table in the manifest.

You can use this code for the development and production, however be aware that the MCAL for AM263x is not yet safety certified and it'll be done in future. Hence TI will be making the incremental bug fixes and feature additions to the existing package.

BIkash said:
2) Is it possible to configure the MCAL driver with Vector Davinci tools ? or is it mandatory to use the EB Tresos for MCAL configuration ?

Yes, TI provides the VectorDE compatibility through the ".arxml" plugins, however you need to contact vector to get their SIP package and integrate to the VectorDE configurator tool, natively the MCAL's from TI side support the EB tresos configurator.

Thanks

0 BIkash over 2 years ago in reply to Kowshik Gudimetla

Intellectual 365 points

Hi Kowshik,

thanks for clarifying.

One question, if we want to use EB tresos for MCAL configuration, will it be possible for us the get the EB license from TI ? If yes, please mention the duration and cost involved if any.

0 Kowshik Gudimetla over 2 years ago in reply to BIkash

TI__Genius 15435 points

Hi Bikash,

The EB tresos user license can be provided by TI , you can request a license by mailing at mcusw_eb_tresos_license_request@list.ti.com , please state your Name, use case and company name.

Thanks

0 BIkash over 2 years ago in reply to Kowshik Gudimetla

Intellectual 365 points

Hi Kowshik,
Also wanted to know if there is any cost associated with the AUTOSAR MCALs ?

+1 Kowshik Gudimetla over 2 years ago in reply to BIkash

TI__Genius 15435 points

Hi Bikash,

There is no cost in any form associated to using our MCAL software from TI side.

0 BIkash over 2 years ago in reply to Kowshik Gudimetla

Intellectual 365 points

Thank You Kowshik for the quick reply.

0 BIkash over 2 years ago in reply to Kowshik Gudimetla

Intellectual 365 points

Hi again Kowshik,

If I understood correctly with EB tresos user license we shall be able to do the MCAL configuration and generation?

also it will be very helpful if you can let me know where we can fine the EB License activation tool and EB configurator tools.

Regards

Bikash

+1 Kowshik Gudimetla over 2 years ago in reply to BIkash

TI__Genius 15435 points

Hi Bikash,

In the MCAL package you've got, please go to the below path mcal_config/ElektroBit/installer and you'll find the license tools and EB tresos tool there. You can unzip these and then install them.

Then once you get the license from us, enable it and use the plugins.

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2634: AM263x : Auotsar MCAL tools