• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 207 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DK-TM4C129X: TIVA C Development tool

Gerald
Genius 9570 points

Part Number: DK-TM4C129X

Hi Experts,

May we ask if there is another Development tool besides DK-TM4C129X  that has the same capability?  Our customer's development kit broke and cannot find another DK-TM4C129X.

We find EK-TM4C1294XL but it is a watered down version of the DK-TM4C129X.  It does not have LCD capability as well as other peripheral capabilities.

Our customer is looking for a development board that has capability similar to DK-TM4C129X.

Also, they partially repaired their damaged DK-TM4C129X  board but now they suspect the TM4C123GH6PMI (U3) is bad.  If they replaced it, would they be able to get the firmware from Ti?  It is for debugging over USB.

I hope you can help us. Thank you.

Best regards,
Gerald

  • 0
    TI__Guru**** 179696 points

    Hi,

    Gerald said:

    We find EK-TM4C1294XL but it is a watered down version of the DK-TM4C129X.  It does not have LCD capability as well as other peripheral capabilities.

    Our customer is looking for a development board that has capability similar to DK-TM4C129X

      DK-TM4C129X EVM is out of stock as I check ti.com and I don't think it will be available in the future. There is no other similar board to it other than EK-TM4C1294XL LaunchPad.

    Gerald said:
    Also, they partially repaired their damaged DK-TM4C129X  board but now they suspect the TM4C123GH6PMI (U3) is bad.  If they replaced it, would they be able to get the firmware from Ti?  It is for debugging over USB.

    I will suggest you first try to update ICDI firmware through LM Flash Programmer. 

    There is a JTAG connector on the board. If updating ICDI firmware doesn't resolve the issue due to a damaged TM4C123, then I will suggest you use an external debug probe such as XDS200, XDS110 or others to debug the target. We do not release ICDI firmware.