• State TI Thinks Resolved
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 297 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM2634: MCAL  00.09.00_06 CAN Module (Busoff State)

Panda Bear
Intellectual 375 points
Part Number: AM2634

Hello

We have integrated the MCAL-CAN Driver into our project. We have recognized that, the Bus Off Processing Interrupt is enabled; but when we generate a Bus off state on the can bus; there is no generated interrupt. Although the Bus off interrupt is registered in our project, the controller does not see any bus off state on the bus. 

An error state for the Can register is also not written:

So our question is: is there a bug on the driver or is there problem with the chip?

Could you verify that the Bus off state will be detected by the chip? Could you you also verify that the bus off interrupt is working?

Thanks in advance 

Best regards