• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 287 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LS0714: How to set up the CAN interface in HALCOGEN?

Cherry Zhou
Mastermind 22235 points
Part Number: TMS570LS0714
Other Parts Discussed in Thread: HALCOGEN,

Hi team,

The CAN serial port on the chip is 89, 90.

What should I do if I want to set the CAN generation code via HALCOGEN to verify that the can interface of the chip is on?

Could you help check this case? Thanks.

Best Regards,

Cherry

  • 0
    TI__Guru 62765 points

    Hi Cherry,

    There is a CAN example for TMS570LS0714 in HALCoGen. You can access this by clicking on Help->Help Topics

    Now select the "example_canCommunication" project.

    In above project we are enabling both CAN1 and CAN2, and we are transmitting data from CAN1 and we are verifying same data on CAN2.

    Cherry Zhou said:
    What should I do if I want to set the CAN generation code via HALCOGEN to verify that the can interface of the chip is on?

    If you follow all the steps mentioned in above example project it will ON the CAN interface for CAN1 and CAN2.

    --

    Thansk & regards,
    Jagadish.