Other Parts Discussed in Thread: TMDS243EVM
Hi Support Team,
Error occurs when using IgH EtherCAT Master ver. 1.6.0
When the customer's ECAT slave board with AM2432 is used,
depending on the type of ECAT master, an error may or may not occur.
- Error occurs
-IgH EtherCAT Master for Linux ver.1.6.0 - Error does not occur
-IgH EtherCAT Master for Linux ver. 1.5.2
-TwinCAT
-ECAT Conformance Test
Error appears when ECAT is started with the master and the red error LED of the ECAT is blinking.
The same error also occurs on TI's TMDS243EVM.
In the customer examination, Beckhoff's ECAT controller and Renesas' CPU (with built-in ECAT controller stack)
were also confirmed to work without any problem, but only AM243x is not working properly.
(According to the checks by Beckhoff and Renesas, no special modifications have been made for IgH.)
Q. Has an error ever occurred depending on the version of IgH EtherCAT Master for Linux?
Please let us know if similar problems have occurred in the past and what we can do to solve them.
Best Regards,
Kanae