AM2432: Custom SOC program using Am2434 LaunchPad debugger

Hi

Chockalingam N said:

Is it possible to program our custom board using the debugger of the AM2434 LP?

If you do not have the XDS110 on your custom board, which debugger are you referring to here?

Regards

Karan

Debug using XDS110 debugger, available in AM2434 LP onboard

Hello Chockalingam,

Can you please explain your setup in detail?

How have you connected the onboard debugger of AM243x LP to the custom board?

Or Are you asking that you are developing and debugging example on AM243x LP and then flashing it to the custom board?

Regards,

Tushar

Hello ,
My previous project I programmed and debugged external boards with the same SOC using evaluation boards.Connect the external board to the Debug out connector from EVB in order to debug it using SEGGER J-Link OB IF.

Comparable I'm curious if the AM2434 LP has the ability to program and debug the external Am243x SOC using the XDS110 debugger, connect to the external board via the debug out connector, or anything else.

Regards,
Chockalingam

Hi Team,
Am waiting for your feedback.

Hi Team,

kindly update the status.

Is it possible to use AM2434 LP or Not for programming the Custom SOC

- Chockalingam 

Hello Chockalingam,

We are confirming this details internally and will update you.

Please expect a response in a day or two.

Regards,

Tushar 

Hi Tushar,

Thank you for the information.

Rgds,

Chockalingam