• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 151 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-AM243: Timeout while doing "SOC Initialization Using CCS Scripting" in AM243X MCU+ SDK 10.00.00

Jason Chiu
Prodigy 160 points
Part Number: LP-AM243

Tool/software:

Dear specialists,

I have a AM243X-LP demo-board. I successfully did "Flash SOC Initialization binary" on the AM243X-LP demo-board.

According to AM243X MCU+ SDK 10.00.00 "Getting Started" chapter's "EVM Setup" section, the next step is "SOC Initialization Using CCS Scripting".

I set the path to the SDK. The next step is to "Create Target Configuration" and "Launch Selected Configuration".

I have problem on the step "Create Target Configuration". I follow the instruction to use CCS pull-down command "view" and then click the "Target Configuration" to open a Target Configuration window. 

Inside the Target Configuration window, the "User Defined" folder doesn't have any ccxml file in it (but, the SDK 10 shows a ccxml file in it).

How do I do in order to "Create" a target configuration ccxml file inside that folder?

Please help.

Thank you very much.

Best Regards,  JasonChiu.
   

  • 0
    TI__Mastermind 39313 points

    Hello Jason,

    Thanks for your query.

    Jason Chiu said:
    Inside the Target Configuration window, the "User Defined" folder doesn't have any ccxml file in it (but, the SDK 10 shows a ccxml file in it).

    Right click on the User Defined section under target configuration window. You will now see an option to create new target configuration file. Click on it and configure accordingly to create a new *.ccxml file.

    Regards,

    Tushar