• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 94 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TM4C1290NCPDT: Replace with TM4C129ENCPDTI3R

TM4C1290NCPDT: Could not burn software

Gabriel Wang1
Genius 4555 points
Part Number: TM4C1290NCPDT

Tool/software:

Dear Expert

Cross validation: Serial number 71901887LTF240901660558 can be burned normally/Serial number 71901887LTF24090160621 burned NG
1) After swapping two TM4C129ENCPDTI3R chips, the BMS board that could be programmed normally failed to be programmed, while the BMS board that could not be programmed normally could be programmed normally;
2) After replacing the BMS board that cannot be burned after swapping with a new TM4C129ENCPDTI3R chip, it can be burned normally.

  • 0
    TI__Guru**** 184366 points
    Gabriel Wang1 said:

    1) After swapping two TM4C129ENCPDTI3R chips, the BMS board that could be programmed normally failed to be programmed, while the BMS board that could not be programmed normally could be programmed normally;
    2) After replacing the BMS board that cannot be burned after swapping with a new TM4C129ENCPDTI3R chip, it can be burned normally.

    Hi Gabriel,

      Can you please elaborate what is wrong with the suspected chip?

      Is the suspected MCU a virgin/fresh device that has never been used before? Or it has been running on the field for some time. If it has been running on the field, how long was it on the field?

    Please provide problem description like:  you cannot connect to the device with the debugger or you cannot program the device. Or the device is loaded with the firmware but it does not run due to memory corruption or I/Os not toggling, etc? Please provide details. 

  • 0 in reply to Charles Tsai
    TI__Guru**** 184366 points

    Hi,

      I have not heard back from you. I will close the thread for now. If you have any update, please write to this thread and the thread will automatically change the status to OPEN.