MSPM0L1105: MSP-GANG will display "error 23"

Daniel Cheng1

Part Number: MSPM0L1105
Other Parts Discussed in Thread: MSP-GANG,

Tool/software:

Hi Expert,

The customer tries to use MSP-GANG to burn the image to MSPM0L1105 of the customized board, but "ERROR 23" will be displayed.

I changed ports 1, 3, and 4 of MSP-GANG but the same error message appears.

Customers can program successfully using XDS110

flash tool Pin define refer to the picture below.

The question looks similar to the discussion below

Do you have any normal use cases or related information?

How to solve the problems that customers are encountering now?

Thanks

Daniel

0 Sal Ye 5 months ago

Hi Daniel,

Refer below thread, make sure the connection of the MSP-GANG is correct (sometimes, I find user will mistake the PIN 1 of the interface).

B.R.

Sal

0 Daniel Cheng1 5 months ago in reply to Sal Ye

Hi Sal

The customer has confirmed that the signal wiring is correct.

Is there anything else that needs to be confirmed?

Thanks

Daniel

0 Sal Ye 5 months ago in reply to Daniel Cheng1

Hi Daniel,

Please make sure customer connect the PIN2 (rather than PIN4) to the MCU VCC if they choose the programmer power supply.

Daniel Cheng1 said:
The question looks similar to the discussion below

B.R.

Sal

Arm-based microcontrollers forum