Other Parts Discussed in Thread: MSPM0G1507
Tool/software:
It seems this issue https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1460185/lp-mspm0l1306-incorrect-adc-result-after-re-enable-conversion-adc-is-triggered-by-comparator-event was resolved. I'm now doing another project using MSPM0G1507. Does the same issue exist for MSPM0G?
Thank you!
