hi, experts
about this I think there are some codes to be optimized:
Technical Reference Manual: SPRUIN7A
3.12.7.3 C Code Example to Unsecure C28x Zone1
3.12.7.7.1 C Code Example to Disable ECSL for C28x-Zone1
(1) for 28002x, I think ECSL register file address should be 0x5F010, not 0x5F000;
(2) for 28002x, "If the ECSL password locations (ECSLPWL) are all = ones (0xFFFF), then the ECSL will now be disable. " is this right?
best wishes!
