• State TI Thinks Resolved
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 84 subscribers
  • Views 324 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMDSDOCKH52C1: Where to find the schematic for this Concerto EVM

TMDSDOCKH52C1: 3D model

Renan Santos Adriano
Mastermind 20780 points
Part Number: TMDSDOCKH52C1

Hello Team,

Posting on behalf of my customer:

I am looking to obtain a step file for the part TMDSDOCKH52C1.

I am designing a mounting scheme and need a CAD model of the microcontroller and its geometry to properly design housing, but I could not find a CAD model for TMDSDOCKH52C1 on the TI site. A simple STP file will do.

I actually do have two other questions regarding the board.

I have been looking but have been unable to find this microcontroller in another configuration. Are you aware of a different configuration of the same board, but designed for horizontal mounting instead of in a vertical daughter card set-up?

And then the second question follows up on that, in the current TMDSDOCKH52C1 configuration, or in the hypothetical horizontal mounting configuration, is there a list of connectors/adapters for this board?

To give you some background, we are designing with this card because it worked before in a mounted vertical daughter card configuration. But we need it to be no longer a vertical daughter card but instead, a horizontal separate card connected via a cable assembly. Hence needing the step model, and connectors and potentially find a more suitable configuration if it exits.

Regards,

Renan

  • 0
    Prodigy 20 points

    I received an email communication saying that the design team does not have a step file. Is it possible they could export a step file for me? If not a DXF file will be enough info for me. Also, the email communication did not mention my questions regarding connectors for a cable assembly or a potential equivalent board configurations for horizontal mounting. Please let me know. Thank you.

  • 0 in reply to Ryan Moxley
    TI__Mastermind 28111 points
    Renan Santos Adriano said:
    I am looking to obtain a step file for the part TMDSDOCKH52C1.

    Unfortunately, we do not have the step file or a way to generate it.

    Renan Santos Adriano said:
    I have been looking but have been unable to find this microcontroller in another configuration. Are you aware of a different configuration of the same board, but designed for horizontal mounting instead of in a vertical daughter card set-up?
    Renan Santos Adriano said:
    And then the second question follows up on that, in the current TMDSDOCKH52C1 configuration, or in the hypothetical horizontal mounting configuration, is there a list of connectors/adapters for this board?

    The controlCARD standard is always designed for vertical mounting. For this specific device, only the vertical mount board exists.

  • 0 in reply to Gus Martinez
    Prodigy 20 points

    Are you aware of any female to male connectors with cabling? The objective is to allow for mounting not directly on the board. I believe this board uses a DIMM100 edge style connector correct?

  • 0 in reply to Ryan Moxley
    TI__Mastermind 42195 points

    Ryan,

    I am unaware of an DIMM100 edge style cabling connectors.(if that is what you're asking)

    You are correct, this is a DIMM100 edge based controlCARD.

    Regards,
    Cody