• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 253 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F280049: Can we modify EPWM action when ITRAP happens?

Julia Li
Expert 3800 points
Part Number: TMS320F280049

Dear Experts,

I ask this for our customer.

Now customer want to know if we can do some code processing in ITRAP. Customer testing found that if ITRAP occurs, one of EPWM channel will be pulled low and another EPWM channel will be pulled high, which will damage the customer's board. They want to know whether the action of the device pin can be modified in the code when ITRAP occurs?

In addition, the customer also wants to know how the CPU behaves when ITRAP occurs?

Thank you for your support.

Best regards,

Julia

  • +1
    TI__Guru** 113655 points

    Hi Julia,

    Julia Li said:
    They want to know whether the action of the device pin can be modified in the code when ITRAP occurs?

    ITRAP is like any other interrupt handler and user should be able to write any code inside it. 

    Julia Li said:
    In addition, the customer also wants to know how the CPU behaves when ITRAP occurs?

    As mentioned in last point, it's like any other interrupt handler so it'll execute the ITRAP handler code. You can find additional detail about ITRAP here.

    Regards,

    Vivek Singh