• State
  • Locked Locked
  • Replies 4 replies
  • Subscribers 82 subscribers
  • Views 154 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CCS/F28M35H52C: Generate application .bin file and load it into flash

TMS320F280049C: Bin file generation issue in ccs

subash Rao
Prodigy 85 points
Part Number: TMS320F280049C

i am making user boot loader for f280049c controller ,in that i will extract bin file using below mentioned method .after that i will receive bin file information byte by byte i will store in internal memory  .

in this process i am getting error because in internal flash memory it wrote wrong data in wrong location  during generation of bin file what ever FFFF is there its not generating the bin file.

kindly check give any solution for the .below i have attached screen shot for the reference. 

  • 0
    Prodigy 85 points

    after all bin file data writing in to internal flash jumping to starting location of new address controller going for ESTOP

  • 0 in reply to subash Rao
    TI__Mastermind 30185 points

    Hello Subash,

    subash Rao said:
    in this process i am getting error because in internal flash memory it wrote wrong data in wrong location  during generation of bin file what ever FFFF is there its not generating the bin file.

    Since the CCS programming is giving you the unexpected values in memory, can you check your .map file to see what is being programmed at this address location?

    subash Rao said:
    after all bin file data writing in to internal flash jumping to starting location of new address controller going for ESTOP

    This operation handler is executed when an invalid instruction is attempted to be executed (i.e. 0x0 or 0xFFFF).

  • 0 in reply to Omer Amir
    Prodigy 85 points

    i have tried with post build cmd also but is getting error  with below mentioned 

    ${CCS_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin ${BuildArtifactFileName}
    ${ProjName}_XX_YY_ZZ.bin ${CG_TOOL_ROOT}/bin/armofd
    ${CG_TOOL_ROOT}/bin/armhex ${CCS_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin

    error as:

    makefile:236: recipe for target 'post-build' failed
    warning: Data is being written to auto-generated file MCU_TI_F280049C_V_0_0_1.i01
    process_begin: CreateProcess(NULL, MCU_TI_F280049C_V_0_0_1_XX_YY_ZZ.bin C:/ti/ccs1230/ccs/tools/compiler/ti-cgt-c2000_22.6.0.LTS/bin/armofd, ...) failed.

    gmake[2]: [post-build] Error 2 (ignored)
    process_begin: CreateProcess(NULL, C:/ti/ccs1230/ccs/tools/compiler/ti-cgt-c2000_22.6.0.LTS/bin/armhex C:/ti/ccs1230/ccs/utils/tiobj2bin/mkhex4bin, ...) failed.

    gmake[2]: [post-build] Error 2 (ignored)
    C:/ti/ccs1230/ccs/tools/compiler/ti-cgt-c2000_22.6.0.LTS/bin/armhex C:/ti/ccs1230/ccs/utils/tiobj2bin/mkhex4bin
    makefile:236: recipe for target 'post-build' failed

  • 0 in reply to subash Rao
    TI__Mastermind 30185 points

    Hello Subash,

    This does not answer my question, please see my earlier reply and provide the information if possible.