• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 83 subscribers
  • Views 120 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28335: C2000 TMS320F28335

Ralph Thornburg
Prodigy 30 points
Part Number: TMS320F28335

Tool/software:

TI Code Composer Studio C2000 support,

 

I have a CCS v6 programing a C2000 TMS320F28335 with a Black Hawk USB560 . 

My IT department will not let the Chrome 27 browser called in my CCS program be used any longer.  Can I update my CCS to use the latest Chrome browser (version 331 I think) and do I need to update all the legacy files shown below to update to the latest Chrome browser or just update to the latest Chrome browser?

  Thank you!

Ralph (Butch) Thornburg

Sr. Test Engineer, Tulsa Performance Center

Electronics Solutions Group

Ducommun Incorporated

11616 East 51st St.

Tulsa, OK 74146

918.459.2348 Office

RThornburg@ducommun.com

www.ducommun.com

  • 0
    TI__Genius 10925 points

    Hi Ralph,

    Let me connect you with the CCS folks to help you further.

    Best Regards,

    Aishwarya

  • 0
    TI__Guru**** 451521 points

    Hello,

    Ralph Thornburg said:
    My IT department will not let the Chrome 27 browser called in my CCS program be used any longer.

    Are you talking about the internal CCS browser? The one integrated into CCS IDE? If so, you cannot change the browser used by the IDE. CCSv6 is very old and unsupported. You may want to consider updating your CCS version.

    Thanks

    ki

  • 0 in reply to Ki
    Prodigy 30 points

    ki,

    It makes me nervous updating CCS version since I was told it did work.  I did update from the help menu but I think there were some warnings when the update was attempted.  Can you send me a link and possibly some instructions on what is the latest software update?

    thank you!

  • 0 in reply to Ralph Thornburg
    TI__Guru**** 451521 points
    Ralph Thornburg said:
    Can you send me a link and possibly some instructions on what is the latest software update?

    There are several considerations here.

    If you are on 32-bit Windows, then the last CCS version you can use is CCS 8.3.1. CCS 9.x and greater will only run on 64-bit Windows

    If you are using XDS560v1 based debug probes, then the last CCS version you can use is CCS 12.0.0. CCS 12.1.x and greater only support XDS560v2 based probes (which is what you have based on your screenshot)

    Finally, our latest version of CCS is version 20. It is VERY different than earlier CCS version since it is based on a new IDE framework called Theia IDE. It looks a lot like VS Code. Typically I would recommend this new CCS version but because it is quite a change there is some learning curve. CCS 12.8.1 is the latest CCS version based on the older Eclipse IDE that you are familiar with.

    For a taste on what CCS 20 looks like, see: https://dev.ti.com/tirex/explore/node?node=A__AAYvq3.tTCJv4S7pKjagLg__CCSTUDIO-ACADEMY__RdkYJ-M__LATEST