CCS/MSP430F67791A: Porting c ode from IAR workspace to CCS workspace

Girish S52

Intellectual 340 points

Part Number: MSP430F67791A

Tool/software: Code Composer Studio

Hi,

How can i port my energy meter code in IAR to CCS workspace..

over 8 years ago

0 James Evans over 8 years ago

TI__Mastermind 49692 points

Hi Girish,

Unfortunately, porting between IDE's is never simple. Instead of porting the energy meter code from IAR to CCS, it may be easier to update/reference the CCS projects inside the "ccs_workspace" folder found in 'slac488.zip' -> 'Code Library' -> 'emeter'.

If this option isn't possible, here are some references that discuss porting from IAR to CCS.

Regards,

James

MSP Customer Applications

0 Girish S52 over 8 years ago in reply to James Evans

Intellectual 340 points

Hi James.

I tried creating new project using CCS workspace library but its not working... Can u explain me the steps to be followed. I am working on energy recording..

Thanks
Girish

0 James Evans over 8 years ago in reply to Girish S52

TI__Mastermind 49692 points

The following threads should be helpful.

Regards,

James

MSP Customer Applications

**Attention** This is a public forum

The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

MSP low-power microcontrollers

MSP low-power microcontroller forum

CCS/MSP430F67791A: Porting c ode from IAR workspace to CCS workspace