This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV2667EVM-CT: USB2ANY firmware update for using Haptic Control Console (HCC)

Guru 29050 points
Part Number: DRV2667EVM-CT
Other Parts Discussed in Thread: USB2ANY, , DRV2605LEVM-CT

Hi Team,

I tried to use Haptic Control Console (HCC) with DRV2667EVM-CT and USB2ANY however having something trouble.
The following red part should indicate "DRVUSBCOM-EVM" however it shows "MSP430-based HID Device" as the following.




According to the following E2E post, I believe USB2ANY firmware update is required however I couldn't find the instructions of how to update.
https://e2e.ti.com/support/other_analog/haptics/f/927/t/593970?tisearch=e2e-quicksearch&keymatch=DRV2667EVM-CT GUI

Could you tell me instructions?


http://www.ti.com/tool/drv2667evm-ct


Best Regards,
Yaita / Japan disty