Other Parts Discussed in Thread: BQ24610
Hi
The customer set the Icharge, the problem as below:
According to the current formula in the data sheet, the charging current is 800mA and the set voltage is 0.16V. However, the actual test reaches 800mA at 0.17V. This error is within 5%, this is within the error range.
If the sense resistor is 0.1ohm, the theoretical calculation setting the voltage of 1.6V can reach 800mA, but the actual need 1.6V can reach about 500mA.
Why is the error so big?
Waiting for your reply.
Thanks
Star