• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 97 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS628510: PWM and PFM conversion threshold

Jaden Yue
Expert 5175 points
Part Number: TPS628510

Hi Team,

May I confirm the PFM threshold of TPS628510? How can I understand the below yellow highlight part? Is the PFM and PWM threshold the same as the CCM/DCM boundary?

Best Regards,

Jaden Yue

  • 0
    TI__Genius 16100 points

    Hello Jaden,

    Thank you for reaching out,

    When the peak inductor current is above 0.8A, the device operates in PWM mode and if the peak current of the inductor is less than 0.8A then it operates in PFM mode.

    Jaden Yue said:
    Is the PFM and PWM threshold the same as the CCM/DCM boundary?

    Yes, those are similar.

    Thank you & regards

    Moheddin.