TPS22919-Q1: ON VIH Query

Jihoon Kim

Part Number: TPS22919-Q1
Other Parts Discussed in Thread: TPS22919

Tool/software:

Hi TI,

I want to use 1.8V for ON pin to enable TPS22919.

On datasheet, I understood It can use to enable IC. But I want to make sure and double check.

Can I use 1.8V level for ON PIN?

Best regards,

+1 Arush Gupta 2 months ago

Hi Jihoon,

Von is an input of comparator which will treat the signal as logic high if Von is higher than V_ih irrespective of the exact pin voltage.

Jihoon Kim said:
I want to use 1.8V for ON pin to enable TPS22919.

This will work.

Best Regards,
Arush

Power management forum