Hello,
On the datasheet for the LM334 adjustable source Figure 1 there are four V- ports. Should these all be shorted, or are they intended to be used as four different current sources?
Thank you,
Randall Irwin
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
On the datasheet for the LM334 adjustable source Figure 1 there are four V- ports. Should these all be shorted, or are they intended to be used as four different current sources?
Thank you,
Randall Irwin
Hi Randall,
I included the figure you are talking about for others viewing.
All of the V- terminals are the same net. I would recommend shorting them together underneath the IC so you can efficiently layout in one layer.
The purpose of this type of layout would permit a more efficient layout if you were to have multiple loads in different cardinal directions around the IC.
Hopefully this helps!