LP5024EVM: How to make a dynamic lighting pattern with LP50 EVM GUI

Kazuto Tatsumi

Part Number: LP5024EVM
Other Parts Discussed in Thread: TIDA-050011

Hello,
Could you please tell me how to make a dynamic lighting pattern with LP 50 EVM GUI?
Now my customer is testing LP5024EVM with LP 50 EVM GUI, and trying to make a dynamic lighting pattern. However, they can't find "Create New" button on the lighting pattern setting screen as different from the Figure 7 on the user's guide. On my computer as well.
I think we should use "Create New" in order to make a dynamic lighting pattern, so please tell me how to use it.
Regards,
Kazuto

over 4 years ago

0 Charles-Chen over 4 years ago

TI__Genius 11836 points

Hi, Kazuto,

It's a pity that the "Create New" button is removed in the released version of GUI, which is different from the Fig.7 on the user's guide. You can use MCU to control the LP50XX to make a user-defined dynamic lighting pattern. Please first refer to the following link concerning code example.

http://www.ti.com/tool/TIDA-050011

0 Kazuto Tatsumi over 4 years ago in reply to Charles-Chen

TI__Intellectual 2820 points

Hi Charles,
I understood. Thank you for your support.
Best Regards,
Kazuto

0 Charles-Chen over 4 years ago in reply to Kazuto Tatsumi

TI__Genius 11836 points

Hi Kazuto,

Ok, get it, any further question, please let me know.

0 Kazuto Tatsumi over 4 years ago in reply to Charles-Chen

TI__Intellectual 2820 points

Hi Charles,

As the customer prefers, we tried to modify the pattern files (e.g. .\assets\devices\patterns.json) but it doesn't work.

Do you have any idea to modify the pattern files by some Text editor?

Best Regards,
Kazuto

0 Charles-Chen over 4 years ago in reply to Kazuto Tatsumi

TI__Genius 11836 points

Hi Kazuto,

You can refer to this thread.

Power management

Power management forum

LP5024EVM: How to make a dynamic lighting pattern with LP50 EVM GUI