[FAQ] DRA821U: change app_remoteswitchcfg_server log UART port

Peter Li79

Part Number: DRA821U
Other Parts Discussed in Thread: DRA821

I am working on a customer DRA821 board.

As the default UART port isn't available for the ethernet firmware log output. How can I change the log output to another UART instance?

over 4 years ago

0 Peter Li79 over 4 years ago

TI__Expert 8940 points

Here is an example for reference:

This example is implemented and verified with the following environment :

SDK V7.3, which can be downloaded from : https://www.ti.com/tool/PROCESSOR-SDK-J7200
DRA821 EVM, more information about this board can be found from: https://www.ti.com/product/DRA821U#design-development##hardware-development
ethfw log output to the MAIN_UART1 .

changes for pdk:

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/791/0001_2D00_ethfw_2D00_use_2D00_main_5F00_uart1_2D00_as_2D00_log_2D00_console.patch

changes for Linux:

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/791/0001_2D00_disable_2D00_main_5F00_uart1_2D00_for_2D00_ethfw_2D00_to_2D00_use.patch

Processors

Processors forum

[FAQ] DRA821U: change app_remoteswitchcfg_server log UART port