DRA821 EVM supports only one port (Port 2) on the GESI card which is why QSGMII card (with 4 ports) is used to showcase multiple ports and that is the default configuration.
The following makefile changes on SDK 7.3 illustrate how to enable Port 2.
Enet makefile change
diff --git a/examples/utils/makefile b/examples/utils/makefile
index 40ccfc9..2bce2ef 100644
--- a/examples/utils/makefile
+++ b/examples/utils/makefile
@@ -29,6 +29,7 @@ else
ifeq ($(APPUTILS_TYPE),full)
MODULE_NAME = enet_example_utils_full
ENET_CFLAGS += -DENETAPPUTILS_UART_ALLOWED
+ ENET_CFLAGS += -DENETAPPUTILS_BYPASS_QSGMII
else
MODULE_NAME = enet_example_utils
ENET_CFLAGS += -DSDK_6_2_CORE_SDK_IMAGE
@@ -40,6 +41,9 @@ else
ifneq ($(SOC),$(filter $(SOC), j7200))
ENET_CFLAGS += -DENETAPPUTILS_UART_ALLOWED
endif
+ ifeq ($(SOC),$(filter $(SOC), j7200))
+ ENET_CFLAGS += -DENETAPPUTILS_BYPASS_QSGMII
+ endif
else
ENET_CFLAGS += -DENETAPPUTILS_UART_ALLOWED
endif
EthFW Concerto makefile change
diff --git a/apps/app_remoteswitchcfg_server/mcu_2_0/concerto.mak b/apps/app_remoteswitchcfg_server/mcu_2_0/concerto.mak index 4bed8a9..1f64e3a 100644 --- a/apps/app_remoteswitchcfg_server/mcu_2_0/concerto.mak +++ b/apps/app_remoteswitchcfg_server/mcu_2_0/concerto.mak @@ -45,9 +45,9 @@ STATIC_LIBS += eth_intervlan STATIC_LIBS += lib_remote_device STATIC_LIBS += lib_remoteswitchcfg_server -ifeq ($(TARGET_PLATFORM),J7200) - DEFS += ENABLE_QSGMII_PORTS -endif +#ifeq ($(TARGET_PLATFORM),J7200) +# DEFS += ENABLE_QSGMII_PORTS +#endif CPSW_APPUTILS_LIB = enet_example_utils
With this change, Port 2 (MAC Port 3 in picture) can be used to talk to the EVM
Regards
Vineet