• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 100 subscribers
  • Views 1031 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM: Boot time benchmarking for OSPI boot mode and XSPI boot mode

Namashivayam Rajendran
Intellectual 960 points
Part Number: TDA4VM

Hello Team,

I am interested to use the Cypress S28HS01GTGABHB01 flash device with TDA4V/4A architecture. Based on earlier analysis by TI, the OSPI boot mode is not supported with the cypress flash device.

So i like to have the boot time estimation or boot time benchmarking reports for OSPI boot mode and XSPI boot mode.

As RTOS SDK 7.3 does not support XSPI boot mode, i also need an earliest time estimate for the XSPI boot mode availability on RTOS SDK.

Thanks and Regards,

Namash

  • 0
    TI__Guru* 77094 points

    Hi Namash,

    Unlocking this thread to restart this discussion.

    Namashivayam Rajendran said:

    So i like to have the boot time estimation or boot time benchmarking reports for OSPI boot mode and XSPI boot mode.

    xSPI boot mode supports loading image in 8d-8d-8d mode @25Mhz (xSPI + SFDP mode) which should be faster than 1S-1S-8S (OSPI) mode  or 1S-1S-1S (SPI) mode of J721e Silicon revision 1.0.

    Customers will most likely use xSPI + SFDP boot mode for best performance.

    In essence XSPI is as per the JEDEC xSPI standard JESD251 & JESD216D and is supported by all compliant flash parts whereas OSPI is a non JEDEC standard supporting 1s-1s-8s boot.

    Namashivayam Rajendran said:

    As RTOS SDK 7.3 does not support XSPI boot mode, i also need an earliest time estimate for the XSPI boot mode availability on RTOS SDK.

    xSPI boot support is already there in RTOS SDK with SBL bootloader. If you have a flash part which is complaint to JEDEC xSPI standard JESD251 & JESD216D then you should be able to boot in xSPI boot mode.

    Regards

    Karan