I want to boot uboot from UART on AM65x. Can you please suggest me the procedures/environment setup to be followed.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Please follow the below procedures to boot from UART on AM65x platforms.
Note: Example shown below is validated using AM65x PG1.0 board using TERATERM (serial console) on WINDOWS OS but same procedure can also be followed on LINUX OS using MINICOM (serial console) with other revisions of boards. While using other revisions, sysfw.itb file will change. Get the latest binaries from linux sdk package at the board-support/prebuilt folder.
See below video for reference.