TDA4VM: based on 8.0 .how to set the OSPI0 clk to 33.3 ? and how to update the tx delay ?

Hi,

Yolanda Zou said:

but when I add another change , such as : set the OSPI_MODULE_CLOCK to OSPI_MODULE_CLK_200M , can not update the OSPI clk to 200/6 = 33.3 , 

How are you measuring this clock?

Also, can you please share a patch of all the changes done for the OSPI diag test?

Regards,
Parth

hi Parth:

 in the file : packaged/ti/board/diag/ospi/src/ospi_test.c

with func BoardDiag_ospiFlashTest() 

 I set   ospi_cfg.funcClk to OSPI_MODULE_CLK_200M with next line:

+ ospi_cfg.funcClk = OSPI_MODULE_CLK_200M;

 OSPI_socSetInitCfg(BOARD_OSPI_INSTANCE, &ospi_cfg);

.....

Hi, 

Parth Nagpal said:

How are you measuring this clock?

Can you please reply to above as well?

Regards,
Parth

our EE test the MCU_OSPI0_CLK (ball E20)

Hi,

Apologies for long delay in response.
is this issue still open? If yes, can you please mention the current state of the issue?

Regards,
Parth