• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 101 subscribers
  • Views 224 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PROCESSOR-SDK-J721E: TDA4

dengchen
Prodigy 180 points
Part Number: PROCESSOR-SDK-J721E

Hello:
         TDA4- Project development, purchased your company's TDA4 development board. We test run SPI on the development board. The SPI demo software has been downloaded to the development board using the CCS tool. The development board has been set to boot mode and connected to the serial port tool SecureCRT 7.3. Connected MCU/UART and UART by usb cable, the serial port tool has no data display. Cannot verify that the SPI is working properly.

          I hope you can help me to see how SPI can be debugged through serial port or other methods.

The version of RTOS_SDK is sdk-rtos-j721e-evm-08_04_00_06
The LINUX_SDK version is ti-processor-sdk-linux-j7-evm-08_04_00_11

  • 0
    TI__Mastermind 42135 points

    Hi,

    Can you please point me to the example you are using and on which core are you running this example?
    Can you please confirm what baud rate is configured for your serial application.

    dengchen said:
    The development board has been set to boot mode

    Also, please confirm the bootmode as well, it's not very clear from the above statement.

    Regards,
    Parth