Other Parts Discussed in Thread: TDA4VM
We use the SBL mode and SD to access the system. By following the steps below, we use the EMMC boot0 method to start, and Linux cannot stably enter the system
Follow these steps:e2e.ti.com/.../4574898
mmc dev 0 1 mmc erase 0x0 0xA000 fatload mmc 1 ${loadaddr} sbl/tiboot3.bin mmc write ${loadaddr} 0x0 0x400 fatload mmc 1 ${loadaddr} sbl/tifs.bin mmc write ${loadaddr} 0x400 0x1000 fatload mmc 1 ${loadaddr} sbl/app mmc write ${loadaddr} 0x1400 0xA000 mmc partconf 0 1 1 1 mmc bootbus 0 2 0 0
Running log:
SBL Revision: 01.00.10.01 (Jun 21 2023 - 09:54:06) ++++[SBL_ReadSysfwImage:235] num_bytes=0x42000(0x42000) pos ++++[SBL_ReadSysfwImage:300] num_bytes=0x42000(0x42000) pos ++++[SBL_ReadSysfwImage:308] num_bytes=0x42000(0x42000) pos [MMCSD_v2_initEmmc:2586]MMCSD:(4f80000) send cmd CMD0 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_initEmmc:2629]MMCSD:(4f80000) send cmd CMD1 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_initEmmc:2629]MMCSD:(4f80000) send cmd CMD1 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_initEmmc:2654]MMCSD:(4f80000) send cmd CMD2 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_initEmmc:2674]MMCSD:(4f80000) send cmd CMD3 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_initEmmc:2686]MMCSD:(4f80000) send cmd CMD9 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_initEmmc:2714]MMCSD:(4f80000) send cmd CMD7 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_initEmmc:2728]MMCSD:(4f80000) send cmd CMD8 [MMCSD_v2_transfer:3090]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3120]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3181]MMCSD:(4f80000) Command Execution Failed [MMCSD_v2_transfer:3194]MMCSD:(4f80000) Pending on transferComplete semaphore [MMCSD_v2_transfer:3234]MMCSD:(4f80000) Data transaction completed [MMCSD_v2_transfer:3266]MMCSD:(4f80000) Data Transfer Successful [MMCSD_v2_initEmmc:2768]MMCSD:(4f80000) send cmd CMD6 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_initEmmc:2790]MMCSD:(4f80000) send cmd CMD6 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_switch_eMMC_mode:2214]MMCSD:(4f80000) send cmd CMD6 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_enableBootPartition:972]MMCSD:(4f80000) send cmd CMD6 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_enableBootPartition:986]MMCSD:(4f80000) send cmd CMD6 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [mmcsd_check_transfer_ready:588]MMCSD:(4f80000) send cmd CMD13 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [mmcsd_send_cmd23:621]MMCSD:(4f80000) send cmd CMD23 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_read:819]MMCSD:(4f80000) send cmd CMD18 [MMCSD_v2_transfer:3090]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3120]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3181]MMCSD:(4f80000) Command Execution Failed [MMCSD_v2_transfer:3194]MMCSD:(4f80000) Pending on transferComplete semaphore [MMCSD_v2_transfer:3234]MMCSD:(4f80000) Data transaction completed [MMCSD_v2_transfer:3266]MMCSD:(4f80000) Data Transfer Successful ++++[SBL_ReadSysfwImage:357] retVal=0 pos TIFS ver: 8.6.3--v08.06.03 (Chill Capybar gaogao Sciclient_setBoardConfigHeader gaogao in Sciclient_setBoardConfigHeader SCISERVER Board Configuration header population... PASSED Sciclient_setBoardConfigHeader... PASSED Initlialzing PLLs ...done. InitlialzingClocks ...done. Initlialzing DDR ...Board_DDRProbe: PASS Board_DDRInitDrv: PASS --->>> LPDDR4 Initialization is in progress ... <<<--- Reg Value: 128 Frequency Change type 1 request from Controller Reg Value: 0 Reg Value: 128 Frequency Change type 0 request from Controller Reg Value: 0 Reg Value: 128 Frequency Change type 1 request from Controller --->>> Frequency Change request handshake is completed... <<<--- LPDDR4_Start: PASS done. Initializing GTC ...Begin parsing user application ++++[SBL_BootImage:413] pos [core_id:0]Calling Sciclient_procBootRequestProcessor, ProcId 0x20... [core_id:1]Calling Sciclient_procBootRequestProcessor, ProcId 0x21... [core_id:8]Calling Sciclient_procBootRequestProcessor, ProcId 0x1... [core_id:9]Calling Sciclient_procBootRequestProcessor, ProcId 0x2... [core_id:10]Calling Sciclient_procBootRequestProcessor, ProcId 0x6... [core_id:11]Calling Sciclient_procBootRequestProcessor, ProcId 0x7... [core_id:12]Calling Sciclient_procBootRequestProcessor, ProcId 0x8... [core_id:13]Calling Sciclient_procBootRequestProcessor, ProcId 0x9... [core_id:18]Calling Sciclient_procBootRequestProcessor, ProcId 0x30... [core_id:19]Calling Sciclient_procBootRequestProcessor, ProcId 0x31... [core_id:23]Calling Sciclient_procBootRequestProcessor, ProcId 0x80... ++++[SBL_BootImage:417] pos If you don't get the logs of the application while booting from boot0 partition then you might need to pass the MAX_APP_SIZE_EMMC (=<size of you application>) while building your appimage ++++[SBL_eMMCBootImage:373] pos [mmcsd_check_transfer_ready:588]MMCSD:(4f80000) send cmd CMD13 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [mmcsd_send_cmd23:621]MMCSD:(4f80000) send cmd CMD23 [MMCSD_v2_transfer:3318]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3340]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3350]MMCSD:(4f80000) Command Execution successfull [MMCSD_v2_read:819]MMCSD:(4f80000) send cmd CMD18 [MMCSD_v2_transfer:3090]MMCSD:(4f80000) Pending on commandComplete semaphore [MMCSD_v2_transfer:3120]MMCSD:(4f80000) Command transaction completed [MMCSD_v2_transfer:3181]MMCSD:(4f80000) Command Execution Failed [MMCSD_v2_transfer:3194]MMCSD:(4f80000) Pending on transferComplete semaphore [MMCSD_v2_transfer:3234]MMCSD:(4f80000) Data transaction completed [MMCSD_v2_transfer:3266]MMCSD:(4f80000) Data Transfer Successful [MMCSD_v2_close:915]MMCSD: Object closed 0x4f80000Searching for X509 certificate ...not found Switching core id 8, proc_id 0x1 to split mode... Calling Sciclient_procBootGetProcessorState, ProcId 0x1... Sciclient_procBootSetProcessorCfg, ProcId 0x1, enabling split mode... Calling Sciclient_procBootGetProcessorState, ProcId 0x1... Enabling MCU TCMs after reset for core 8 Disabling HW-based memory init of MCU TCMs for core 8 Sciclient_procBootSetProcessorCfg update TCM enable/disable settings... Copying 0x40 bytes to 0x41010000 Copying 0x490 bytes to 0x41010040 Copying 0x448 bytes to 0x410104d0 Copying 0x318 bytes to 0x41010918 Copying 0x2c0 bytes to 0x41010c30 Copying 0x118 bytes to 0x41010ef0 Copying 0x8c bytes to 0xa0100000 Copying 0x1184 bytes to 0xa0100400 Copying 0x510 bytes to 0xa0101588 Copying 0x22c00 bytes to 0xa0408000 Copying 0xad10 bytes to 0xa043ac00 Copying 0x41b8 bytes to 0xa044bb00 Setting entry point for core 8 @0x41010000 Switching core id 10, proc_id 0x6 to split mode... Calling Sciclient_procBootGetProcessorState, ProcId 0x6... Sciclient_procBootSetProcessorCfg, ProcId 0x6, enabling split mode... Sciclient_pmSetModuleState Off, DevId 0x117... Calling Sciclient_procBootGetProcessorState, ProcId 0x6... Enabling MCU TCMs after reset for core 10 Disabling HW-based memory init of MCU TCMs for core 10 Sciclient_procBootSetProcessorCfg update TCM enable/disable settings... Setting HALT for ProcId 0x6... Sciclient_pmSetModuleState On, DevId 0x117... Clearing core_id 10 (lock-step) ATCM @ 0x5c00000 Clearing core_id 10 (lock-step) BTCM @ 0x5c10000 Translating coreid 10 local ATCM addr 0x0 to SoC MCU ATCM addr 0x5c00000 Copying 0x40 bytes to 0x5c00000 Translating coreid 10 local ATCM addr 0x40 to SoC MCU ATCM addr 0x5c00040 Copying 0x490 bytes to 0x5c00040 Translating coreid 10 local ATCM addr 0x4d0 to SoC MCU ATCM addr 0x5c004d0 Copying 0x448 bytes to 0x5c004d0 Translating coreid 10 local ATCM addr 0x918 to SoC MCU ATCM addr 0x5c00918 Copying 0x318 bytes to 0x5c00918 Translating coreid 10 local ATCM addr 0xc30 to SoC MCU ATCM addr 0x5c00c30 Copying 0x118 bytes to 0x5c00c30 Copying 0x8c bytes to 0xa2100000 Copying 0x2c0 bytes to 0xa2f21a80 Copying 0x63740 bytes to 0xa30de000 Copying 0x376c0 bytes to 0xa3141740 Copying 0x5880 bytes to 0xa31b6880 Setting entry point for core 10 @0x0 Switching core id 10, proc_id 0x6 to split mode... Calling Sciclient_procBootGetProcessorState, ProcId 0x6... Sciclient_procBootSetProcessorCfg, ProcId 0x6, enabling split mode... Sciclient_pmSetModuleState Off, DevId 0x118... Calling Sciclient_procBootGetProcessorState, ProcId 0x7... Enabling MCU TCMs after reset for core 11 Sciclient_procBootSetProcessorCfg update TCM enable/disable settings... Setting HALT for ProcId 0x7... Sciclient_pmSetModuleState On, DevId 0x118... Clearing core_id 11 (lock-step) ATCM @ 0x5d00000 Clearing core_id 11 (lock-step) BTCM @ 0x5d10000 Translating coreid 11 local ATCM addr 0x0 to SoC MCU ATCM addr 0x5d00000 Copying 0x40 bytes to 0x5d00000 Translating coreid 11 local ATCM addr 0x40 to SoC MCU ATCM addr 0x5d00040 Copying 0x490 bytes to 0x5d00040 Translating coreid 11 local ATCM addr 0x4d0 to SoC MCU ATCM addr 0x5d004d0 Copying 0x448 bytes to 0x5d004d0 Translating coreid 11 local ATCM addr 0x918 to SoC MCU ATCM addr 0x5d00918 Copying 0x318 bytes to 0x5d00918 Translating coreid 11 local ATCM addr 0xc30 to SoC MCU ATCM addr 0x5d00c30 Copying 0x118 bytes to 0x5d00c30 Copying 0x8c bytes to 0xa4100000 Copying 0x2c0 bytes to 0xa49d0b10 Copying 0xa40 bytes to 0xa49d0dd0 Copying 0x32e60 bytes to 0xa4b8e000 Copying 0x13030 bytes to 0xa4bc0e60 Setting entry point for core 11 @0x0 Copying 0x68880 bytes to 0x9e800000 Only load (not execute) image @0x9e800000 Copying 0x1232200 bytes to 0x80080000 Only load (not execute) image @0x80080000 Copying 0x15bc8 bytes to 0x82000000 Only load (not execute) image @0x82000000 Sciclient_pmSetModuleState On, DevId 0x4... Copying 0xabc0 bytes to 0x70000000 Setting entry point for core 0 @0x70000000 ++++[SBL_eMMCBootImage:404] pos ++++[SBL_eMMCBootImage:407] pos ++++[SBL_BootImage:433] pos SBL_ReleaseAllCores Sciclient_procBootReleaseProcessor, ProcId 0x20... Sciclient_procBootReleaseProcessor, ProcId 0x21... Sciclient_procBootReleaseProcessor, ProcId 0x1... Sciclient_procBootReleaseProcessor, ProcId 0x2... Sciclient_procBootReleaseProcessor, ProcId 0x6... Sciclient_procBootReleaseProcessor, ProcId 0x7... Sciclient_procBootReleaseProcessor, ProcId 0x8... Sciclient_procBootReleaseProcessor, ProcId 0x9... Sciclient_procBootReleaseProcessor, ProcId 0x30... Sciclient_procBootReleaseProcessor, ProcId 0x31... Sciclient_procBootReleaseProcessor, ProcId 0x80... [core_id:10]Calling Sciclient_procBootRequestProcessor, ProcId 0x6... Sciclient_procBootSetProcessorCfg, ProcId 0x6, EntryPoint 0x0... Sciclient_pmSetModuleClkFreq, DevId 0x117 @ 1000000000Hz... Clearing HALT for ProcId 0x6... Sciclient_procBootReleaseProcessor, ProcId 0x6... [core_id:11]Calling Sciclient_procBootRequestProcessor, ProcId 0x7... Sciclient_procBootSetProcessorCfg, ProcId 0x7, EntryPoint 0x0... Sciclient_pmSetModuleClkFreq, DevId 0x118 @ 1000000000Hz... Clearing HALT for ProcId 0x7... Sciclient_procBootReleaseProcessor, ProcId 0x7... [core_id:0]Calling Sciclient_procBootRequestProcessor, ProcId 0x20... Sciclient_procBootSetProcessorCfg, ProcId 0x20, EntryPoint 0x70000000... Sciclient_pmSetModuleClkFreq, DevId 0xca @ 2000000000Hz... Sciclient_pmSetModuleState Off, DevId 0xca... Sciclient_pmSetModuleState On, DevId 0xca... Sciclient_procBootReleaseProcessor, ProcId 0x20... ++++[main:491] pos ++++[main:495] pos [core_id:8]Calling Sciclient_procBootRequestProcessor, ProcId 0x1... Sciclient_procBootSetProcessorCfg, ProcId 0x1, EntryPoint 0x41010000... Sciclient_pmSetModuleClkFreq, DevId 0x11c @ 1000000000Hz... Copying first 128 bytes from app to MCU ATCM @ 0x0 for core 8 [core_id:9]Calling Sciclient_procBootRequestProcessor, ProcId 0x2... Skipping Sciclient_procBootSetProcessorCfg for ProcId 0x2, EntryPoint 0xfffffffe... [core_id:8]Calling Sciclient_procBootRequestProcessor, ProcId 0x1...
Linux can enter the system, but mmc0: running CQE recovery error is reported
NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb3-dirty
NOTICE: BL31: Built : 17:56:46, Mar 1 2023
I/TC:
I/TC: OP-TEE version: 3.20.0 (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #1 Wed Mar 1 17:56:56 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[ 0.000000] Linux version 5.10.162-g76b3e88d56 (jjh@jjh-QiTianM437-N000) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1 SMP PREEMPT Sat May 27 10:52:15 CST 2023
[ 0.000000] Machine model: Texas Instruments J721S2 EVM
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002880000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 31 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a4000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 31 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a4100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a6000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a6100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a7000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a7100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 32 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-rtos-ipc-memory-region@a8000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000aa000000, size 96 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-dma-memory@aa000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-c71-dma-memory@b0000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b0100000, size 95 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-c71_0-memory@b0100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b6000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-dma-memory@b6000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b6100000, size 31 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-memory@b6100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000d8000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-lo@d8000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000880000000, size 704 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-hi@880000000, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000b7ffffff]
[ 0.000000] node 0: [mem 0x00000000b8000000-0x00000000d7ffffff]
[ 0.000000] node 0: [mem 0x00000000d8000000-0x00000000dbffffff]
[ 0.000000] node 0: [mem 0x00000000dc000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] cma: Reserved 512 MiB at 0x00000000dd000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 22 pages/cpu s50392 r8192 d31528 u90112
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x2880000 root=/dev/mmcblk0p2 r w rootfstype=ext4 rootwait
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 506476K/2097152K available (11200K kernel code, 1160K rwdata, 4300K rodata, 1856K init, 433K bss, 1066388K reserved, 524288K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @81c00000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000081430000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000081440000
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000002] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008403] Console: colour dummy device 80x25
[ 0.012968] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.023639] pid_max: default: 32768 minimum: 301
[ 0.028395] LSM: Security Framework initializing
[ 0.033145] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.040712] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.049605] rcu: Hierarchical SRCU implementation.
[ 0.054681] Platform MSI: msi-controller@1820000 domain created
[ 0.060890] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.070194] EFI services will not be available.
[ 0.074931] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.090016] Detected PIPT I-cache on CPU1
[ 0.090042] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[ 0.090054] GICv3: CPU1: using allocated LPI pending table @0x0000000081450000
[ 0.090095] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[ 0.090153] smp: Brought up 1 node, 2 CPUs
[ 0.119499] SMP: Total of 2 processors activated.
[ 0.124305] CPU features: detected: 32-bit EL0 Support
[ 0.129560] CPU features: detected: CRC32 instructions
[ 0.144190] CPU: All CPU(s) started at EL2
[ 0.148393] alternatives: patching kernel code
[ 0.153521] devtmpfs: initialized
[ 0.161328] KASLR disabled due to lack of seed
[ 0.165992] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.175959] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.190076] pinctrl core: initialized pinctrl subsystem
[ 0.195767] DMI not present or invalid.
[ 0.200041] NET: Registered protocol family 16
[ 0.205471] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.212737] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.220713] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.229047] thermal_sys: Registered thermal governor 'step_wise'
[ 0.229050] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.235654] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.249302] ASID allocator initialised with 32768 entries
[ 0.267464] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.274322] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.281174] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.288021] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.295546] cryptd: max_cpu_qlen set to 1000
[ 0.301702] k3-chipinfo 43000014.chipid: Family:J721S2 rev:SR1.0 JTAGID[0x0bb7502f] Detected
[ 0.310775] vsys_3v3: supplied by evm_12v0
[ 0.315171] vsys_5v0: supplied by evm_12v0
[ 0.319905] iommu: Default domain type: Translated
[ 0.325093] SCSI subsystem initialized
[ 0.329156] mc: Linux media interface: v0.10
[ 0.333546] videodev: Linux video capture interface: v2.00
[ 0.339178] pps_core: LinuxPPS API ver. 1 registered
[ 0.344249] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.353587] PTP clock support registered
[ 0.357609] EDAC MC: Ver: 3.0.0
[ 0.361410] FPGA manager framework
[ 0.364935] Advanced Linux Sound Architecture Driver Initialized.
[ 0.371584] clocksource: Switched to clocksource arch_sys_counter
[ 0.377920] VFS: Disk quotas dquot_6.6.0
[ 0.381956] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.391699] Carveout Heap: Exported 512 MiB at 0x00000000b8000000
[ 0.397992] NET: Registered protocol family 2
[ 0.402620] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.410867] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.419614] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.427764] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.435377] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.442176] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.449056] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.456441] NET: Registered protocol family 1
[ 0.461184] RPC: Registered named UNIX socket transport module.
[ 0.467240] RPC: Registered udp transport module.
[ 0.472044] RPC: Registered tcp transport module.
[ 0.476850] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.483432] NET: Registered protocol family 44
[ 0.487977] PCI: CLS 0 bytes, default 64
[ 0.492360] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.502858] Initialise system trusted keyrings
[ 0.507503] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.515731] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.521995] NFS: Registering the id_resolver key type
[ 0.527175] Key type id_resolver registered
[ 0.531452] Key type id_legacy registered
[ 0.535582] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.542430] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.550081] 9p: Installing v9fs 9p2000 file system support
[ 0.575417] Key type asymmetric registered
[ 0.579605] Asymmetric key parser 'x509' registered
[ 0.584605] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.592164] io scheduler mq-deadline registered
[ 0.596789] io scheduler kyber registered
[ 0.602196] pinctrl-single 4301c000.pinctrl: 101 pins, size 404
[ 0.608415] pinctrl-single 11c000.pinctrl: 72 pins, size 288
[ 0.618638] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[ 0.631308] brd: module loaded
[ 0.638146] loop: module loaded
[ 0.642004] megasas: 07.714.04.00-rc1
[ 0.647700] tun: Universal TUN/TAP device driver, 1.6
[ 0.653150] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.659558] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.665631] sky2: driver version 1.30
[ 0.669959] VFIO - User Level meta-driver version: 0.3
[ 0.675770] i2c /dev entries driver
[ 0.680130] sdhci: Secure Digital Host Controller Interface driver
[ 0.686451] sdhci: Copyright(c) Pierre Ossman
[ 0.691080] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.697397] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.703732] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.711083] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 0.715645] optee: revision 3.20 (8e74d476)
[ 0.732061] optee: dynamic shared memory is enabled
[ 0.741532] optee: initialized driver
[ 0.746593] NET: Registered protocol family 17
[ 0.751229] 9pnet: Installing 9P2000 support
[ 0.755630] Key type dns_resolver registered
[ 0.760091] Loading compiled-in X.509 certificates
[ 0.772292] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
[ 0.799875] omap_i2c 40b00000.i2c: bus 0 rev0.12 at 100 kHz
[ 0.806005] omap_i2c 40b10000.i2c: bus 1 rev0.12 at 100 kHz
[ 0.812459] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 125 domain created
[ 0.821008] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 148 domain created
[ 0.830339] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 227 domain created
[ 0.838991] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 265 created
[ 0.849068] ti-udma 311a0000.dma-controller: Number of rings: 48
[ 0.855854] ti-udma 311a0000.dma-controller: Channels: 24 (bchan: 0, tchan: 8, rchan: 16)
[ 0.865144] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:272
[ 0.875034] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
[ 0.881800] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64
[ 0.890678] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[878,128] sci-dev-id:259
[ 0.900848] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
[ 0.907609] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64
[ 0.915315] omap8250 40a00000.serial: failed to get alias
[ 0.921505] printk: console [ttyS2] disabled
[ 0.925910] 2880000.serial: ttyS2 at MMIO 0x2880000 (irq = 19, base_baud = 3000000) is a 8250
[ 0.934662] printk: console [ttyS2] enabled
[ 0.934662] printk: console [ttyS2] enabled
[ 0.943103] printk: bootconsole [ns16550a0] disabled
[ 0.943103] printk: bootconsole [ns16550a0] disabled
[ 0.954616] cadence-qspi 47040000.spi: error -ENODEV: No Rx DMA available
[ 0.961675] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[ 0.968546] spi-nor: probe of spi0.0 failed with error -2
[ 0.977112] davinci_mdio c200f00.mdio: Configuring MDIO in manual mode
[ 1.023586] davinci_mdio c200f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.031491] mdio_bus c200f00.mdio: MDIO device at address 0 is missing.
[ 1.038128] am65-cpsw-nuss c200000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000
[ 1.050889] am65-cpsw-nuss c200000.ethernet: Use random MAC address
[ 1.057147] am65-cpsw-nuss c200000.ethernet: initialized cpsw ale version 1.4
[ 1.064267] am65-cpsw-nuss c200000.ethernet: ALE Table size 64
[ 1.070477] am65-cpsw-nuss c200000.ethernet: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0
[ 1.080784] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010c, freq:200000000, add_val:4 pps:0
[ 1.190462] mmc0: CQHCI version 5.10
[ 1.195068] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fca100
[ 1.201897] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fca100
[ 1.208699] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fca100
[ 1.215502] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fca100
[ 1.222635] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
[ 1.230200] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit
[ 1.232628] ti-udma 31150000.dma-controller: Channels: 60 (tchan: 30, rchan: 30, gp-rflow: 16)
[ 1.249492] davinci_mdio c200f00.mdio: Configuring MDIO in manual mode
[ 1.295590] davinci_mdio c200f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.303504] mdio_bus c200f00.mdio: MDIO device at address 0 is missing.
[ 1.310159] am65-cpsw-nuss c200000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000
[ 1.322929] am65-cpsw-nuss c200000.ethernet: Use random MAC address
[ 1.329219] am65-cpsw-nuss c200000.ethernet: initialized cpsw ale version 1.4
[ 1.336345] am65-cpsw-nuss c200000.ethernet: ALE Table size 64
[ 1.342549] am65-cpsw-nuss c200000.ethernet: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0
[ 1.352604] am65-cpsw-nuss c200000.ethernet: set new flow-id-base 82
[ 1.361236] mmc0: Command Queue Engine enabled
[ 1.365690] mmc0: new high speed MMC card at address 0001
[ 1.372045] debugfs: Directory 'pd:39' with parent 'pm_genpd' already present!
[ 1.372210] mmcblk0: mmc0:0001 8GUF4R 7.28 GiB
[ 1.379353] debugfs: Directory 'pd:38' with parent 'pm_genpd' already present!
[ 1.383877] mmcblk0boot0: mmc0:0001 8GUF4R partition 1 31.9 MiB
[ 1.391521] debugfs: Directory 'pd:276' with parent 'pm_genpd' already present!
[ 1.396987] mmcblk0boot1: mmc0:0001 8GUF4R partition 2 31.9 MiB
[ 1.404763] debugfs: Directory 'pd:154' with parent 'pm_genpd' already present!
[ 1.410225] mmcblk0rpmb: mmc0:0001 8GUF4R partition 3 4.00 MiB, chardev (237:0)
[ 1.421345] ALSA device list:
[ 1.427700] No soundcards found.
[ 1.431134] mmcblk0: p1 p2
[ 1.439403] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 1.446747] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 1.461444] EXT4-fs (mmcblk0p2): recovery complete
[ 1.467015] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.475134] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.482821] devtmpfs: mounted
[ 1.486677] Freeing unused kernel memory: 1856K
[ 1.491307] Run /sbin/init as init process
[ 1.516502] mmc0: running CQE recovery
[ 1.523345] mmc0: running CQE recovery
[ 1.530158] mmc0: running CQE recovery
[ 1.534061] blk_update_request: I/O error, dev mmcblk0, sector 1392192 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0
[ 1.548602] mmc0: running CQE recovery
[ 1.555408] mmc0: running CQE recovery
[ 1.562212] mmc0: running CQE recovery
[ 1.566114] blk_update_request: I/O error, dev mmcblk0, sector 1393480 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.579948] mmc0: running CQE recovery
[ 1.586405] mmc0: running CQE recovery
[ 1.592861] mmc0: running CQE recovery
[ 1.596762] blk_update_request: I/O error, dev mmcblk0, sector 1393256 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.610959] mmc0: running CQE recovery
[ 1.617890] mmc0: running CQE recovery
[ 1.624715] mmc0: running CQE recovery
[ 1.628617] blk_update_request: I/O error, dev mmcblk0, sector 1392824 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.643044] mmc0: running CQE recovery
[ 1.649852] mmc0: running CQE recovery
[ 1.656655] mmc0: running CQE recovery
[ 1.660558] blk_update_request: I/O error, dev mmcblk0, sector 1392488 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.674229] mmc0: running CQE recovery
[ 1.679740] mmc0: running CQE recovery
[ 1.685248] mmc0: running CQE recovery
[ 1.689145] blk_update_request: I/O error, dev mmcblk0, sector 1392056 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.702705] mmc0: running CQE recovery
[ 1.708375] mmc0: running CQE recovery
[ 1.714042] mmc0: running CQE recovery
[ 1.717939] blk_update_request: I/O error, dev mmcblk0, sector 1391904 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
INIT: version 2.96 booting
[ 1.771522] mmc0: running CQE recovery
[ 1.777753] mmc0: running CQE recovery
[ 1.783963] mmc0: running CQE recovery
[ 1.787877] blk_update_request: I/O error, dev mmcblk0, sector 1393736 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.798904] blk_update_request: I/O error, dev mmcblk0, sector 1393448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1.817091] mmc0: running CQE recovery
[ 1.822537] mmc0: running CQE recovery
[ 1.827950] mmc0: running CQE recovery
[ 1.831852] blk_update_request: I/O error, dev mmcblk0, sector 1298728 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 1.846591] mmc0: running CQE recovery
[ 1.853430] mmc0: running CQE recovery
[ 1.860253] mmc0: running CQE recovery
[ 1.867503] mmc0: running CQE recovery
[ 1.873811] mmc0: running CQE recovery
[ 1.880112] mmc0: running CQE recovery
[ 1.887091] mmc0: running CQE recovery
[ 1.893638] mmc0: running CQE recovery
[ 1.900181] mmc0: running CQE recovery
[ 1.912266] mmc0: running CQE recovery
[ 1.919085] mmc0: running CQE recovery
[ 1.925888] mmc0: running CQE recovery
[ 1.980854] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[ 1.990175] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
hwclock: can't open '/dev/misc/rtc': No such file or directory
Wed Mar 1 18:28:42 UTC 2023
hwclock: can't open '/dev/misc/rtc': No such file or directory
[ 2.116058] random: dd: uninitialized urandom read (512 bytes read)
INIT: Entering runlevel: 5
Configuring network interfaces... ifconfig: SIOCSIFFLAGS: No such device
ifconfig: SIOCSIFFLAGS: No such device
done.
/dev/mem opened.
Memory mapped at address 0xffffa0457000.
Read at address 0x00683030 (0xffffa0457030): 0x00000068
Write at address 0x00683030 (0xffffa0457030): 0x00000068, readback 0x00000068
/dev/mem opened.
Memory mapped at address 0xffffbb27f000.
Read at address 0x00683034 (0xffffbb27f034): 0x002AAAAB
Write at address [ 2.206638] k3_r5_rproc bus@100000:bus@28380000:r5fss@41000000: fw_name = j721s2-mcu-r5f0_0-fw(41000000.r5f)
0x00683034 (0xffffbb27f034): 0x002AAAAB, readback 0x002AAAAB
/[ 2.220810] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
dev/mem opened.
Memory mapped at address 0xffff8900d000.
Rea[ 2.238099] platform 41000000.r5f: configured R5F for IPC-only mode
d at address 0x00683080 (0xffff8900d080): 0x00008007
Write at[ 2.249905] platform 41000000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000
address 0x00683080 (0xffff8900d080): 0x00008007, readback 0x000[ 2.264817] remoteproc remoteproc0: 41000000.r5f is available
08007
mount: mounting none on /sys failed: Device or resource [ 2.275773] remoteproc remoteproc0: attaching to 41000000.r5f
busy
[ 2.287096] platform 41000000.r5f: R5F core initialized in IPC-only mode
[ 2.294289] remoteproc0#vdev0buffer: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000
[ 2.303932] virtio_rpmsg_bus virtio0: rpmsg host is online
[ 2.310444] remoteproc0#vdev0buffer: registered virtio0 (type 7)
[ 2.316541] remoteproc remoteproc0: remote processor 41000000.r5f is now attached
[ 2.324022] k3_r5_rproc bus@100000:bus@28380000:r5fss@41000000: fw_name = j721s2-mcu-r5f0_1-fw(41400000.r5f)
[ 2.333858] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xd
[ 2.340893] k3_r5_rproc bus@100000:bus@28380000:r5fss@41000000: fw_name = j721s2-mcu-r5f0_1-fw(41400000.r5f) ignore
[ 2.353318] k3_r5_rproc bus@100000:r5fss@5c00000: fw_name = j721s2-main-r5f0_0-fw(5c00000.r5f)
[ 2.361985] platform 5c00000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
[ 2.373720] platform 5c00000.r5f: configured R5F for IPC-only mode
[ 2.379969] platform 5c00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000
[ 2.389537] remoteproc remoteproc1: 5c00000.r5f is available
[ 2.395216] remoteproc remoteproc1: attaching to 5c00000.r5f
[ 2.400951] platform 5c00000.r5f: R5F core initialized in IPC-only mode
[ 2.407557] remoteproc1#vdev0buffer: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000
[ 2.417185] virtio_rpmsg_bus virtio1: rpmsg host is online
[ 2.423595] remoteproc1#vdev0buffer: registered virtio1 (type 7)
[ 2.429699] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd
[ 2.436734] remoteproc remoteproc1: remote processor 5c00000.r5f is now attached
[ 2.444160] k3_r5_rproc bus@100000:r5fss@5c00000: fw_name = j721s2-main-r5f0_1-fw(5d00000.r5f)
[ 2.452826] platform 5d00000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
[ 2.464559] platform 5d00000.r5f: configured R5F for IPC-only mode
[ 2.470802] platform 5d00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000
[ 2.480360] remoteproc remoteproc2: 5d00000.r5f is available
[ 2.486048] remoteproc remoteproc2: attaching to 5d00000.r5f
[ 2.491750] platform 5d00000.r5f: R5F core initialized in IPC-only mode
[ 2.498353] remoteproc2#vdev0buffer: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000
[ 2.507969] virtio_rpmsg_bus virtio2: rpmsg host is online
[ 2.514327] remoteproc2#vdev0buffer: registered virtio2 (type 7)
[ 2.520434] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xd
[ 2.527470] remoteproc remoteproc2: remote processor 5d00000.r5f is now attached
[ 2.535731] k3_r5_rproc bus@100000:r5fss@5e00000: MCU cluster requires both R5F cores to be enabled but num_cores is set to = 0
[ 2.551021] k3-dsp-rproc 64800000.dsp: assigned reserved memory node vision-apps-c71-dma-memory@b0000000
[ 2.562051] k3-dsp-rproc 64800000.dsp: configured DSP for remoteproc mode
[ 2.568881] remoteproc remoteproc3: 64800000.dsp is available
[ 2.575935] k3-dsp-rproc 65800000.dsp: assigned reserved memory node vision-apps-c71_1-dma-memory@b6000000
[ 2.588028] k3-dsp-rproc 65800000.dsp: configured DSP for remoteproc mode
[ 2.595010] remoteproc remoteproc4: 65800000.dsp is available
insmod: ERROR: could not load module /lib/modules/5.10.162-g76b3[ 2.605974] mmc0: running CQE recovery
e88d56/extra/pvrsrvkm.ko: No such file or directory
[ 2.629116] mmc0: running CQE recovery
[ 2.652039] mmc0: running CQE recovery
[ 2.674925] mmc0: running CQE recovery
[ 2.690592] mmc0: running CQE recovery
[ 2.706190] mmc0: running CQE recovery
[ 2.718658] mmc0: running CQE recovery
[ 2.725605] mmc0: running CQE recovery
[ 2.733380] mmc0: running CQE recovery
[ 2.743735] mmc0: running CQE recovery
[ 2.750427] mmc0: running CQE recovery
[ 2.757835] mmc0: running CQE recovery
[ 2.767978] mmc0: running CQE recovery
[ 2.774212] mmc0: running CQE recovery
[ 2.782421] mmc0: running CQE recovery
[ 2.792327] mmc0: running CQE recovery
[ 2.805308] mmc0: running CQE recovery
[ 2.811469] mmc0: running CQE recovery
[ 2.817876] mmc0: running CQE recovery
[ 2.825168] mmc0: running CQE recovery
[ 2.831823] mmc0: running CQE recovery
[ 2.838570] mmc0: running CQE recovery
[ 2.847956] mmc0: running CQE recovery
[ 2.853529] mmc0: running CQE recovery
[ 2.859791] mmc0: running CQE recovery
[ 2.884186] mmc0: running CQE recovery
[ 2.889820] mmc0: running CQE recovery
[ 2.895252] mmc0: running CQE recovery
[ 2.904500] mmc0: running CQE recovery
[ 2.910568] mmc0: running CQE recovery
[ 2.916622] mmc0: running CQE recovery
[ 2.920592] EXT4-fs warning (device mmcblk0p2): ext4_dx_find_entry:1692: inode #918: lblock 15: comm vx_app_multi_ca: error -5 reading directory block
/opt/vision_apps/vx_app_multi_cam.out: error while loading shared libraries: libdrm.so.2: cannot open shared object file: No such file or directory
[ 2.959337] mmc0: running CQE recovery
[ 2.982419] mmc0: running CQE recovery
[ 3.005166] mmc0: running CQE recovery
[ 3.028207] mmc0: running CQE recovery
[ 3.042527] mmc0: running CQE recovery
[ 3.057231] mmc0: running CQE recovery
[ 3.068262] mmc0: running CQE recovery
[ 3.075131] mmc0: running CQE recovery
[ 3.082242] mmc0: running CQE recovery
[ 3.089490] mmc0: running CQE recovery
[ 3.096509] mmc0: running CQE recovery
[ 3.103717] mmc0: running CQE recovery
[ 3.117730] mmc0: running CQE recovery
[ 3.124408] mmc0: running CQE recovery
[ 3.131160] mmc0: running CQE recovery
[ 3.141056] mmc0: running CQE recovery
[ 3.155731] mmc0: running CQE recovery
[ 3.170169] mmc0: running CQE recovery
[ 3.193170] mmc0: running CQE recovery
[ 3.208759] mmc0: running CQE recovery
[ 3.214730] mmc0: running CQE recovery
[ 3.228461] mmc0: running CQE recovery
[ 3.242405] mmc0: running CQE recovery
[ 3.248545] mmc0: running CQE recovery
[ 3.254431] mmc0: running CQE recovery
[ 3.262552] mmc0: running CQE recovery
[ 3.269786] mmc0: running CQE recovery
[ 3.276815] mmc0: running CQE recovery
[ 3.299847] mmc0: running CQE recovery
[ 3.305949] mmc0: running CQE recovery
[ 3.312207] mmc0: running CQE recovery
[ 3.321546] mmc0: running CQE recovery
[ 3.328401] mmc0: running CQE recovery
[ 3.335510] mmc0: running CQE recovery
[ 3.348784] mmc0: running CQE recovery
[ 3.359733] mmc0: running CQE recovery
[ 3.370927] mmc0: running CQE recovery
[ 3.402977] mmc0: running CQE recovery
[ 3.410020] mmc0: running CQE recovery
[ 3.417118] mmc0: running CQE recovery
[ 3.424907] mmc0: running CQE recovery
[ 3.431931] mmc0: running CQE recovery
[ 3.439032] mmc0: running CQE recovery
[ 3.450104] mmc0: running CQE recovery
[ 3.456976] mmc0: running CQE recovery
[ 3.463834] mmc0: running CQE recovery
[ 3.472008] mmc0: running CQE recovery
[ 3.479116] mmc0: running CQE recovery
[ 3.486225] mmc0: running CQE recovery
[ 3.497576] mmc0: running CQE recovery
[ 3.504453] mmc0: running CQE recovery
[ 3.511676] mmc0: running CQE recovery
[ 3.520255] mmc0: running CQE recovery
[ 3.527292] mmc0: running CQE recovery
[ 3.534319] mmc0: running CQE recovery
[ 3.555750] mmc0: running CQE recovery
[ 3.562800] mmc0: running CQE recovery
[ 3.569819] mmc0: running CQE recovery
[ 3.586632] mmc0: running CQE recovery
[ 3.593512] mmc0: running CQE recovery
[ 3.600363] mmc0: running CQE recovery
[ 3.608312] remoteproc remoteproc4: powering up 65800000.dsp
[ 3.613979] remoteproc remoteproc4: Booting fw image j721s2-c71_1-fw, size 9760696
[ 3.617884] mmc0: running CQE recovery
[ 3.621591] remoteproc remoteproc4: unsupported resource 65538
[ 3.628571] mmc0: running CQE recovery
[ 3.633723] k3-dsp-rproc 65800000.dsp: booting DSP core using boot addr = 0xb6200000
[ 3.638299] mmc0: running CQE recovery
[ 3.646544] remoteproc4#vdev0buffer: assigned reserved memory node vision-apps-c71_1-dma-memory@b6000000
[ 3.656462] virtio_rpmsg_bus virtio3: rpmsg host is online
[ 3.660534] mmc0: running CQE recovery
[ 3.662015] remoteproc4#vdev0buffer: registered virtio3 (type 7)
[ 3.669075] mmc0: running CQE recovery
[ 3.671788] remoteproc remoteproc4: remote processor 65800000.dsp is now up
[ 3.678690] mmc0: running CQE recovery
[ 3.686389] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xd
[ 3.702440] mmc0: running CQE recovery
[ 3.709479] mmc0: running CQE recovery
[ 3.716577] mmc0: running CQE recovery
[ 3.737682] mmc0: running CQE recovery
[ 3.744565] mmc0: running CQE recovery
[ 3.751679] mmc0: running CQE recovery
[ 3.762761] mmc0: running CQE recovery
[ 3.769776] mmc0: running CQE recovery
[ 3.776872] mmc0: running CQE recovery
[ 3.798570] mmc0: running CQE recovery
[ 3.805616] mmc0: running CQE recovery
[ 3.812730] mmc0: running CQE recovery
[ 3.824619] mmc0: running CQE recovery
[ 3.831752] mmc0: running CQE recovery
[ 3.838599] mmc0: running CQE recovery
[ 3.858961] mmc0: running CQE recovery
[ 3.866009] mmc0: running CQE recovery
[ 3.873123] mmc0: running CQE recovery
[ 3.885623] mmc0: running CQE recovery
[ 3.892485] mmc0: running CQE recovery
[ 3.899332] mmc0: running CQE recovery
[ 3.919564] mmc0: running CQE recovery
[ 3.926611] mmc0: running CQE recovery
[ 3.933722] mmc0: running CQE recovery
[ 3.947763] mmc0: running CQE recovery
[ 3.954817] mmc0: running CQE recovery
[ 3.961932] mmc0: running CQE recovery
[ 3.980040] mmc0: running CQE recovery
[ 3.987084] mmc0: running CQE recovery
[ 3.994199] mmc0: running CQE recovery
[ 4.009159] mmc0: running CQE recovery
[ 4.016199] mmc0: running CQE recovery
[ 4.023315] mmc0: running CQE recovery
[ 4.041428] mmc0: running CQE recovery
[ 4.048556] mmc0: running CQE recovery
[ 4.055405] mmc0: running CQE recovery
[ 4.065954] mmc0: running CQE recovery
[ 4.072937] mmc0: running CQE recovery
[ 4.079759] mmc0: running CQE recovery
[ 4.092615] mmc0: running CQE recovery
[ 4.099618] mmc0: running CQE recovery
[ 4.106695] mmc0: running CQE recovery
[ 4.118560] mmc0: running CQE recovery
[ 4.125401] mmc0: running CQE recovery
[ 4.132231] mmc0: running CQE recovery
[ 4.142684] mmc0: running CQE recovery
[ 4.149710] mmc0: running CQE recovery
[ 4.156721] mmc0: running CQE recovery
[ 4.179281] mmc0: running CQE recovery
[ 4.186151] mmc0: running CQE recovery
[ 4.192985] mmc0: running CQE recovery
[ 4.203151] mmc0: running CQE recovery
[ 4.210002] mmc0: running CQE recovery
[ 4.216847] mmc0: running CQE recovery
[ 4.235563] mmc0: running CQE recovery
[ 4.242429] mmc0: running CQE recovery
[ 4.249263] mmc0: running CQE recovery
[ 4.261080] mmc0: running CQE recovery
[ 4.268115] mmc0: running CQE recovery
[ 4.274959] mmc0: running CQE recovery
[ 4.284530] mmc0: running CQE recovery
[ 4.291532] mmc0: running CQE recovery
[ 4.298624] mmc0: running CQE recovery
[ 4.307934] mmc0: running CQE recovery
[ 4.315034] mmc0: running CQE recovery
[ 4.321880] mmc0: running CQE recovery
[ 4.344527] mmc0: running CQE recovery
[ 4.351582] mmc0: running CQE recovery
[ 4.358594] mmc0: running CQE recovery
[ 4.369551] mmc0: running CQE recovery
[ 4.376652] mmc0: running CQE recovery
[ 4.383497] mmc0: running CQE recovery
[ 4.390277] mmc0: running CQE recovery
[ 4.396245] mmc0: running CQE recovery
[ 4.403180] mmc0: running CQE recovery
[ 4.412194] mmc0: running CQE recovery
[ 4.418406] mmc0: running CQE recovery
[ 4.424445] mmc0: running CQE recovery
[ 4.446048] mmc0: running CQE recovery
[ 4.453182] mmc0: running CQE recovery
[ 4.460031] mmc0: running CQE recovery
[ 4.471841] mmc0: running CQE recovery
[ 4.478883] mmc0: running CQE recovery
[ 4.485986] mmc0: running CQE recovery
[ 4.501623] mmc0: running CQE recovery
[ 4.508493] mmc0: running CQE recovery
[ 4.515327] mmc0: running CQE recovery
[ 4.522480] mmc0: running CQE recovery
[ 4.529301] mmc0: running CQE recovery
[ 4.536118] mmc0: running CQE recovery
[ 4.545801] mmc0: running CQE recovery
[ 4.552802] mmc0: running CQE recovery
[ 4.559640] mmc0: running CQE recovery
[ 4.566809] mmc0: running CQE recovery
[ 4.573544] mmc0: running CQE recovery
[ 4.580273] mmc0: running CQE recovery
[ 4.588982] mmc0: running CQE recovery
[ 4.595817] mmc0: running CQE recovery
[ 4.602650] mmc0: running CQE recovery
[ 4.615775] mmc0: running CQE recovery
[ 4.622783] mmc0: running CQE recovery
[ 4.629619] mmc0: running CQE recovery
[ 4.636885] mmc0: running CQE recovery
[ 4.643708] mmc0: running CQE recovery
[ 4.650520] mmc0: running CQE recovery
[ 4.657669] mmc0: running CQE recovery
[ 4.664491] mmc0: running CQE recovery
[ 4.671307] mmc0: running CQE recovery
[MCU1_0] 9.527398 s: CIO: Init ... Done !!!
[MCU1_0] 9.527480 s: ### CPU Frequency = 1000000000 Hz
[MCU1_0] 9.527522 s: CPU is running FreeRTOS
[MCU1_0] 9.527550 s: APP: Init ... !!!
[MCU1_0] 9.527576 s: MEM: Init ... !!!
[MCU1_0] 9.527616 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ d8000000 of size 8388608 bytes !!!
[MCU1_0] 9.527937 s: MEM: Init ... Done !!!
[MCU1_0] 9.528643 s: IPC: Init ... !!!
[MCU1_0] 9[ 4.727994] remoteproc remoteproc3: powering up 64800000.dsp
.529234 s: IPC: 6 CPUs participating in IPC !!!
[MCU1_0] [ 4.736353] remoteproc remoteproc3: Booting fw image j721s2-c71_0-fw, size 14815296
9.529330 s: IPC: Waiting for HLOS to be ready ... !!!
[MCU1_[ 4.749571] remoteproc remoteproc3: unsupported resource 65538
0] 12.174526 s: IPC: HLOS is ready !!!
[MCU1_0] 12.19[ 4.764756] k3-dsp-rproc 64800000.dsp: booting DSP core using boot addr = 0xb0200000
5437 s: IPC: Init ... Done !!!
[MCU1_0] 12.195500 s: APP:[ 4.774462] remoteproc3#vdev0buffer: assigned reserved memory node vision-apps-c71-dma-memory@b0000000
Syncing with 5 CPUs ... !!!
[MCU2_0] 9.527456 s: CIO: I[ 4.789437] virtio_rpmsg_bus virtio4: rpmsg host is online
nit ... Done !!!
[MCU2_0] 9.527509 s: ### CPU Frequency [ 4.800140] remoteproc3#vdev0buffer: registered virtio4 (type 7)
= 1000000000 Hz
[MCU2_0] 9.527542 s: CPU is running Free[ 4.811780] remoteproc remoteproc3: remote processor 64800000.dsp is now up
RTOS
[MCU2_0] 9.527564 s: APP: Init ... !!!
[MCU2_0] [ 4.826773] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0x15
9.527583 s: SCICLIENT: Init ... !!!
[MCU2_0] 9.5278[ 4.837075] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0xd
00 s: SCICLIENT: DMSC FW version [8.6.3--v08.06.03 (Chill Capyba[ 4.849570] virtio_rpmsg_bus virtio3: creating channel ti.ipc4.ping-pong addr 0xe
r]
[MCU2_0] 9.527834 s: SCICLIENT: DMSC FW revision 0x8 [ 4.862675] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0x15
[MCU2_0] 9.527861 s: SCICLIENT: DMSC FW ABI revision 3[ 4.875296] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15
.1
[MCU2_0] 9.527892 s: SCICLIENT: Init ... Done !!!
[ 4.887896] virtio_rpmsg_bus virtio4: creating channel ti.ipc4.ping-pong addr 0xe
[MCU2_0] 9.527916 s: UDMA: Init ... !!!
[MCU2_0] 9.[ 4.900976] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xe
528988 s: UDMA: Init ... Done !!!
[MCU2_0] 9.529021 s: U[ 4.913961] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0x15
DMA: Init ... !!!
[MCU2_0] 9.529610 s: UDMA: Init for CS[ 4.926627] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0x15
ITX/CSIRX ... Done !!!
[MCU2_0] 9.529657 s: MEM: Init ..[ 4.939244] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xe
. !!!
[MCU2_0] 9.529691 s: MEM: Created heap (DDR_LOCAL_[ 4.952323] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xe
MEM, id=0, flags=0x00000004) @ d9000000 of size 16777216 bytes !!!
[MCU2_0] 9.529750 s: MEM: Created heap (L3_MEM, id=1, flags=0x00000000) @ 60000000 of size 524288 bytes !!!
[MCU2_0] 9.529804 s: MEM: Init ... Done !!!
[MCU2_0] 9.529827 s: IPC: Init ... !!!
[MCU2_0] 9.529873 s: IPC: 6 CPUs participating in IPC !!!
[MCU2_0] 9.529907 s: IPC: Waiting for HLOS to be ready ... !!!
[MCU2_0] 12.287777 s: IPC: HLOS is ready !!!
[MCU2_0] 12.299015 s: IPC: Init ... Done !!!
[MCU2_0] 12.299058 s: APP: Syncing with 5 CPUs ... !!!
[MCU2_1] 9.527487 s: CIO: Init ... Done !!!
[MCU2_1] 9.527536 s: ### CPU Frequency = 1000000000 Hz
[MCU2_1] 9.527568 s: CPU is running FreeRTOS
[MCU2_1] 9.527589 s: APP: Init ... !!!
[MCU2_1] 9.527608 s: SCICLIENT: Init ... !!!
[MCU2_1] 9.527840 s: SCICLIENT: DMSC FW version [8.6.3--v08.06.03 (Chill Capybar]
[MCU2_1] 9.527872 s: SCICLIENT: DMSC FW revision 0x8
[MCU2_1] 9.527898 s: SCICLIENT: DMSC FW ABI revision 3.1
[MCU2_1] 9.527929 s: SCICLIENT: Init ... Done !!!
[MCU2_1] 9.527952 s: UDMA: Init ... !!!
[MCU2_1] 9.529183 s: UDMA: Init ... Done !!!
[MCU2_1] 9.529227 s: MEM: Init ... !!!
[MCU2_1] 9.529259 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ da000000 of size 16777216 bytes !!!
[MCU2_1] 9.529315 s: MEM: Created heap (L3_MEM, id=1, flags=0x00000001) @ 60080000 of size 524288 bytes !!!
[MCU2_1] 9.529365 s: MEM: Init ... Done !!!
[MCU2_1] 9.529387 s: IPC: Init ... !!!
[MCU2_1] 9.529431 s: IPC: 6 CPUs participating in IPC !!!
[MCU2_1] 9.529466 s: IPC: Waiting for HLOS to be ready ... !!!
[MCU2_1] 12.378561 s: IPC: HLOS is ready !!!
[MCU2_1] 12.389744 s: IPC: Init ... Done !!!
[MCU2_1] 12.389780 s: APP: Syncing with 5 CPUs ... !!!
[C7x_2 ] 13.546258 s: CIO: Init ... Done !!!
[C7x_2 ] 13.546275 s: ### CPU Frequency = 1000000000 Hz
[C7x_2 ] 13.546288 s: CPU is running FreeRTOS
[C7x_2 ] 13.546298 s: APP: Init ... !!!
[C7x_2 ] 13.546306 s: SCICLIENT: Init ... !!!
[C7x_2 ] 13.546421 s: SCICLIENT: DMSC FW version [8.6.3--v08.06.03 (Chill Capybar]
[C7x_2 ] 13.546437 s: SCICLIENT: DMSC FW revision 0x8
[C7x_2 ] 13.546447 s: SCICLIENT: DMSC FW ABI revision 3.1
[C7x_2 ] 13.546458 s: SCICLIENT: Init ... Done !!!
[C7x_2 ] 13.546467 s: UDMA: Init ... !!!
[C7x_2 ] 13.547310 s: UDMA: Init ... Done !!!
[C7x_2 ] 13.547322 s: MEM: Init ... !!!
[C7x_2 ] 13.547334 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 127000000 of size 16777216 bytes !!!
[C7x_2 ] 13.547356 s: MEM: Created heap (L2_MEM, id=2, flags=0x00000001) @ 65800000 of size 458752 bytes !!!
[C7x_2 ] 13.547374 s: MEM: Created heap (L1_MEM, id=3, flags=0x00000001) @ 65e00000 of size 16384 bytes !!!
[C7x_2 ] 13.547392 s: MEM: Created heap (DDR_SCRATCH_MEM, id=4, flags=0x00000001) @ 128000000 of size 67108864 bytes !!!
[C7x_2 ] 13.547411 s: MEM: Init ... Done !!!
[C7x_2 ] 13.547419 s: IPC: Init ... !!!
[C7x_2 ] 13.547435 s: IPC: 6 CPUs participating in IPC !!!
[C7x_2 ] 13.547449 s: IPC: Waiting for HLOS to be ready ... !!!
[C7x_2 ] 13.547461 s: IPC: HLOS is ready !!!
[C7x_2 ] 13.549702 s: IPC: Init ... Done !!!
[C7x_2 ] 13.549716 s: APP: Syncing with 5 CPUs ... !!!
[MCU1_0] 14.675575 s: APP: Syncing with 5 CPUs ... Done !!!
[MCU1_0] 14.675831 s: REMOTE_SERVICE: Init ... !!!
[MCU2_0] 14.675571 s: APP: Syncing with 5 CPUs ... Done !!!
[MCU2_0] 14.675609 s: REMOTE_SERVICE: Init ... !!!
[MCU2_0] 14.676923 s: REMOTE_SERVICE: Init ... Done !!!
[MCU2_0] 14.676964 s: FVID2: Init ... !!!
[MCU2_0] 14.677064 s: FVID2: Init ... Done !!!
[MCU2_0] 14.677091 s: SCICLIENT: Sciclient_pmSetModuleState module=219 state=2
[MCU2_0] 14.677260 s: SCICLIENT: Sciclient_pmSetModuleState success
[MCU2_0] 14.677299 s: VHWA: VPAC Init ... !!!
[MCU2_0] 14.677322 s: SCICLIENT: Sciclient_pmSetModuleState module=361 state=2
[MCU2_0] 14.677461 s: SCICLIENT: Sciclient_pmSetModuleState success
[MCU2_0] 14.677488 s: VHWA: LDC Init ... !!!
[MCU2_1] 14.675571 s: APP: Syncing with 5 CPUs ... Done !!!
[MCU2_1] 14.675606 s: REMOTE_SERVICE: Init ... !!!
[MCU2_1] 14.676921 s: REMOTE_SERVICE: Init ... Done !!!
[MCU2_1] 14.676962 s: FVID2: Init ... !!!
[MCU2_1] 14.677060 s: FVID2: Init ... Done !!!
[MCU2_1] 14.677086 s: VHWA: DMPAC: Init ... !!!
[MCU2_1] 14.677108 s: SCICLIENT: Sciclient_pmSetModuleState module=58 state=2
[MCU2_1] 14.677325 s: SCICLIENT: Sciclient_pmSetModuleState success
[MCU2_1] 14.677353 s: SCICLIENT: Sciclient_pmSetModuleState module=62 state=2
[MCU2_1] 14.677489 s: SCICLIENT: Sciclient_pmSetModuleState success
[MCU2_1] 14.677514 s: VHWA: DOF Init ... !!!
[C7x_1 ] 14.672161 s: CIO: Init ... Done !!!
[C7x_1 ] 14.672176 s: ### CPU Frequency = 1000000000 Hz
[C7x_1 ] 14.672188 s: CPU is running FreeRTOS
[C7x_1 ] 14.672197 s: APP: Init ... !!!
[C7x_1 ] 14.672204 s: SCICLIENT: Init ... !!!
[C7x_1 ] 14.672318 s: SCICLIENT: DMSC FW version [8.6.3--v08.06.03 (Chill Capybar]
[C7x_1 ] 14.672333 s: SCICLIENT: DMSC FW revision 0x8
[C7x_1 ] 14.672344 s: SCICLIENT: DMSC FW ABI revision 3.1
[C7x_1 ] 14.672356 s: SCICLIENT: Init ... Done !!!
[C7x_1 ] 14.672365 s: UDMA: Init ... !!!
[C7x_1 ] 14.673150 s: UDMA: Init ... Done !!!
[C7x_1 ] 14.673162 s: MEM: Init ... !!!
[C7x_1 ] 14.673175 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 117000000 of size 268435456 bytes !!!
[C7x_1 ] 14.673196 s: MEM: Created heap (L3_MEM, id=1, flags=0x00000001) @ 70020000 of size 3964928 bytes !!!
[C7x_1 ] 14.673214 s: MEM: Created heap (L2_MEM, id=2, flags=0x00000001) @ 64800000 of size 458752 bytes !!!
[C7x_1 ] 14.673232 s: MEM: Created heap (L1_MEM, id=3, flags=0x00000001) @ 64e00000 of size 16384 bytes !!!
[C7x_1 ] 14.673249 s: MEM: Created heap (DDR_SCRATCH_MEM, id=4, flags=0x00000001) @ 100000000 of size 385875968 bytes !!!
[C7x_1 ] 14.673268 s: MEM: Init ... Done !!!
[C7x_1 ] 14.673276 s: IPC: Init ... !!!
[C7x_1 ] 14.673290 s: IPC: 6 CPUs participating in IPC !!!
[C7x_1 ] 14.673304 s: IPC: Waiting for HLOS to be ready ... !!!
[C7x_1 ] 14.673317 s: IPC: HLOS is ready !!!
[C7x_1 ] 14.675543 s: IPC: Init ... Done !!!
[C7x_1 ] 14.675557 s: APP: Syncing with 5 CPUs ... !!!
[C7x_1 ] 14.675570 s: APP: Syncing with 5 CPUs ... Done !!!
[C7x_1 ] 14.675581 s: REMOTE_SERVICE: Init ... !!!
[C7x_1 ] 14.675746 s: REMOTE_SERVICE: Init ... Done !!!
[C7x_1 ] 14.675797 s: VX_ZONE_INIT:Enabled
[C7x_1 ] 14.675810 s: VX_ZONE_ERROR:Enabled
[C7x_1 ] 14.675841 s: VX_ZONE_WARNING:Enabled
[C7x_1 ] 14.676072 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1
[C7x_1 ] 14.676167 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_2
[C7x_1 ] 14.676233 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_3
[C7x_1 ] 14.676299 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_4
[C7x_1 ] 14.676373 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_5
[C7x_1 ] 14.676440 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_6
[C7x_1 ] 14.676507 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_7
[C7x_1 ] 14.676575 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP_C7-1_PRI_8
[C7x_1 ] 14.676599 s: VX_ZONE_INIT:[tivxInitLocal:130] Initialization Done !!!
[C7x_1 ] 14.676612 s: APP: OpenVX Target kernel init ... !!!
[C7x_1 ] 14.676742 s: APP: OpenVX Target kernel init ... Done !!!
[C7x_1 ] 14.676756 s: APP: Init ... Done !!!
[C7x_1 ] 14.676767 s: APP: Run ... !!!
[C7x_1 ] 14.676776 s: IPC: Starting echo test ...
[C7x_1 ] 14.676938 s: APP: Run ... Done !!!
[C7x_1 ] 14.678156 s: IPC: Echo status: mpu1_0[x] mcu1_0[x] mcu2_0[x] mcu2_1[x] C7X_1[s] C7X_2[P]
[C7x_2 ] 14.675572 s: APP: Syncing with 5 CPUs ... Done !!!
[C7x_2 ] 14.675588 s: REMOTE_SERVICE: Init ... !!!
[C7x_2 ] 14.675749 s: REMOTE_SERVICE: Init ... Done !!!
[C7x_2 ] 14.675772 s: VX_ZONE_INIT:Enabled
[C7x_2 ] 14.675817 s: VX_ZONE_ERROR:Enabled
[C7x_2 ] 14.675846 s: VX_ZONE_WARNING:Enabled
[C7x_2 ] 14.676372 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:59] Added target DSP-1
[C7x_2 ] 14.676394 s: VX_ZONE_INIT:[tivxInitLocal:130] Initialization Done !!!
[C7x_2 ] 14.676410 s: APP: OpenVX Target kernel init ... !!!
[C7x_2 ] 14.676671 s: APP: OpenVX Target kernel init ... Done !!!
[C7x_2 ] 14.676686 s: UDMA Copy: Init ... !!!
[C7x_2 ] 14.677687 s: UDMA Copy: Init ... Done !!!
[C7x_2 ] 14.677702 s: APP: Init ... Done !!!
[C7x_2 ] 14.677712 s: APP: Run ... !!!
[C7x_2 ] 14.677721 s: IPC: Starting echo test ...
[C7x_2 ] 14.677873 s: APP: Run ... Done !!!
[C7x_2 ] 14.678168 s: IPC: Echo status: mpu1_0[x] mcu1_0[x] mcu2_0[x] mcu2_1[x] C7X_1[P] C7X_2[s]
[MCU1_0] 14.683637 s: REMOTE_SERVICE: Init ... Done !!!
[MCU1_0] 14.684758 s: APP: Init ... Done !!!
[MCU1_0] 14.687005 s: APP: Run ... !!!
[MCU1_0] 14.687639 s: IPC: Starting echo test ...
[MCU2_0] 14.680365 s: VHWA: LDC Init ... Done !!!
[MCU2_0] 14.680403 s: VHWA: MSC Init ... !!!
[MCU2_0] 14.689050 s: VHWA: MSC Init ... Done !!!
[MCU2_0] 14.689085 s: VHWA: NF Init ... !!!
[MCU2_1] 14.681914 s: VHWA: DOF Init ... Done !!!
[MCU2_1] 14.681949 s: VHWA: SDE Init ... !!!
[MCU2_1] 14.683587 s: VHWA: SDE Init ... Done !!!
[MCU2_1] 14.683618 s: VHWA: DMPAC: Init ... Done !!!
[MCU2_1] 14.683652 s: VX_ZONE_INIT:Enabled
[MCU2_1] 14.683677 s: VX_ZONE_ERROR:Enabled
[MCU2_1] 14.683703 s: VX_ZONE_WARNING:Enabled
[MCU2_1] 14.684713 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target MCU2-1
[MCU2_1] 14.684892 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DMPAC_SDE
[MCU2_1] 14.685070 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DMPAC_DOF
[MCU2_1] 14.685116 s: VX_ZONE_INIT:[tivxInitLocal:130] Initialization Done !!!
[MCU2_1] 14.685146 s: APP: OpenVX Target kernel init ... !!!
[MCU2_1] 14.685368 s: APP: OpenVX Target kernel init ... Done !!!
[MCU2_1] 14.685395 s: UDMA Copy: Init ... !!!
[MCU2_1] 14.686749 s: UDMA Copy: Init ... Done !!!
[MCU2_1] 14.686786 s: APP: Init ... Done !!!
[MCU2_1] 14.686811 s: APP: Run ... !!!
[MCU2_1] 14.686832 s: IPC: Starting echo test ...
[MCU2_1] 14.689307 s: APP: Run ... Done !!!
[MCU2_1] 14.689826 s: IPC: Echo status: mpu1_0[x] mcu1_0[x] mcu2_0[x] mcu2_1[s] C7X_1[P] C7X_2[.]
[MCU2_1] 14.689910 s: IPC: Echo status: mpu1_0[x] mcu1_0[x] mcu2_0[x] mcu2_1[s] C7X_1[P] C7X_2[P]
[C7x_1 ] 14.689780 s: IPC: Echo status: mpu1_0[x] mcu1_0[x] mcu2_0[x] mcu2_1[P] C7X_1[s] C7X_2[P]
[C7x_2 ] 14.689807 s: IPC: Echo status: mpu1_0[x] mcu1_0[x] mcu2_0[x] mcu2_1[P] C7X_1[P] C7X_2[s]
[MCU1_0] 14.694722 s: IPC: Echo status: mpu1_0[x] mcu1_0[s] mcu2_0[x] mcu2_1[P] C7X_1[x] C7X_2[x]
[MCU1_0] 14.696801 s: IPC: Echo status: mpu1_0[x] mcu1_0[s] mcu2_0[x] mcu2_1[P] C7X_1[P] C7X_2[x]
[MCU1_0] 14.697327 s: APP: Run ... Done !!!
[MCU1_0] 14.697457 s: IPC: Echo status: mpu1_0[x] mcu1_0[s] mcu2_0[x] mcu2_1[P] C7X_1[P] C7X_2[P]
[MCU2_0] 14.690119 s: VHWA: NF Init ... Done !!!
[MCU2_0] 14.690154 s: VHWA: VISS Init ... !!!
[MCU2_0] 14.697162 s: VHWA: VISS Init ... Done !!!
[MCU2_0] 14.697204 s: VHWA: VPAC Init ... Done !!!
[MCU2_0] 14.697239 s: VX_ZONE_INIT:Enabled
[MCU2_0] 14.697265 s: VX_ZONE_ERROR:Enabled
[MCU2_0] 14.697289 s: VX_ZONE_WARNING:Enabled
[MCU2_0] 14.698292 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target MCU2-0
[MCU2_0] 14.698475 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target VPAC_NF
[MCU2_0] 14.698662 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target VPAC_LDC1
[MCU2_0] 14.698846 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target VPAC_MSC1
[MCU2_0] 14.699019 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target VPAC_MSC2
[MCU2_0] 14.699230 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target VPAC_VISS1
[MCU2_0] 14.699414 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE1
[MCU2_0] 14.699605 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE2
[MCU2_0] 14.699804 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DISPLAY1
[MCU2_0] 14.699989 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DISPLAY2
[MCU2_0] 14.700164 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CSITX
[MCU2_0] 14.700347 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE3
[MCU2_0] 14.700524 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE4
[MCU2_0] 14.700718 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE5
[MCU2_0] 14.700907 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE6
[MCU2_1] 14.690658 s: IPC: Echo status: mpu1_0[x] mcu1_0[P] mcu2_0[x] mcu2_1[s] C7X_1[P] C7X_2[P]
[C7x_1 ] 14.690626 s: IPC: Echo status: mpu1_0[x] mcu1_0[P] mcu2_0[x] mcu2_1[P] C7X_1[s] C7X_2[P]
[C7x_2 ] 14.690661 s: IPC: Echo status: mpu1_0[x] mcu1_0[P] mcu2_0[x] mcu2_1[P] C7X_1[P] C7X_2[s]
[MCU2_0] 14.701090 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE7
[MCU2_0] 14.701272 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CAPTURE8
[MCU2_0] 14.701445 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DSS_M2M1
[MCU2_0] 14.701620 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DSS_M2M2
[MCU2_0] 14.701796 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DSS_M2M3
[MCU2_0] 14.701975 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target DSS_M2M4
[MCU2_0] 14.702144 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:66] Added target CSITX2
[MCU2_0] 14.702187 s: VX_ZONE_INIT:[tivxInitLocal:130] Initialization Done !!!
[MCU2_0] 14.702217 s: APP: OpenVX Target kernel init ... !!!
[MCU2_0] 14.728278 s: APP: OpenVX Target kernel init ... Done !!!
[MCU2_0] 14.728314 s: CSI2RX: Init ... !!!
[MCU2_0] 14.728337 s: SCICLIENT: Sciclient_pmSetModuleState module=136 state=2
[MCU2_0] 14.728472 s: SCICLIENT: Sciclient_pmSetModuleState success
[MCU2_0] 14.728501 s: SCICLIENT: Sciclient_pmSetModuleState module=38 state=2
[MCU2_0] 14.728647 s: SCICLIENT: Sciclient_pmSetModuleState success
[MCU2_0] 14.728674 s: SCICLIENT: Sciclient_pmSetModuleState module=39 state=2
[MCU2_0] 14.728772 s: SCICLIENT: Sciclient_pmSetModuleState success
[MCU2_0] 14.728798 s: SCICLIENT: Sciclient_pmSetModuleState module=152 state=2
[MCU2_0] 14.728873 s: SCICLIENT: Sciclient_pmSetModuleState success
[MCU2_0] 14.728899 s: SCICLIENT: Sciclient_pmSetModuleState module=153 state=2
[MCU2_0] 14.728964 s: SCICLIENT: Sciclient_pmSetModuleState success
[MCU2_0] 14.729110 s: CSI2RX: Init ... Done !!!
[MCU2_0] 14.729136 s: ISS: Init ... !!!
[MCU2_0] 14.729160 s: Found sensor BYD_DOUBLE_CAMERA_YUV at location 0
[MCU2_0] 14.729194 s: Found sensor BYD_IMX_CAMERA_RAW10 at location 1
[MCU2_0] 14.729225 s: IssSensor_Init ... Done !!!
[MCU2_0] 14.729275 s: IttRemoteServer_Init ... Done !!!
[MCU2_0] 14.729301 s: VISS REMOTE SERVICE: Init ... !!!
[MCU2_0] 14.729351 s: VISS REMOTE SERVICE: Init ... Done !!!
[MCU2_0] 14.729378 s: UDMA Copy: Init ... !!!
[MCU2_0] 14.730372 s: UDMA Copy: Init ... Done !!!
[MCU2_0] 14.730431 s: APP: Init ... Done !!!
[MCU2_0] 14.730458 s: APP: Run ... !!!
[MCU2_0] 14.730480 s: IPC: Starting echo test ...
[MCU1_0] 14.733697 s: IPC: Echo status: mpu1_0[x] mcu1_0[s] mcu2_0[P] mcu2_1[P] C7X_1[P] C7X_2[P]
[MCU2_0] 14.732963 s: APP: Run ... Done !!!
[MCU2_0] 14.733767 s: IPC: Echo status: mpu1_0[x] mcu1_0[.] mcu2_0[s] mcu2_1[P] C7X_1[.] C7X_2[.]
[MCU2_0] 14.733858 s: IPC: Echo status: mpu1_0[x] mcu1_0[.] mcu2_0[s] mcu2_1[P] C7X_1[P] C7X_2[.]
[MCU2_0] 14.733931 s: IPC: Echo status: mpu1_0[x] mcu1_0[.] mcu2_0[s] mcu2_1[P] C7X_1[P] C7X_2[P]
[MCU2_0] 14.734003 s: IPC: Echo status: mpu1_0[x] mcu1_0[P] mcu2_0[s] mcu2_1[P] C7X_1[P] C7X_2[P]
[MCU2_1] 14.733632 s: IPC: Echo status: mpu1_0[x] mcu1_0[P] mcu2_0[P] mcu2_1[s] C7X_1[P] C7X_2[P]
[C7x_1 ] 14.733593 s: IPC: Echo status: mpu1_0[x] mcu1_0[P] mcu2_0[P] mcu2_1[P] C7X_1[s] C7X_2[P]
[C7x_2 ] 14.733608 s: IPC: Echo status: mpu1_0[x] mcu1_0[P] mcu2_0[P] mcu2_1[P] C7X_1[P] C7X_2[s]
hwclock: can't open '/dev/misc/rtc': No such file or directory
Starting syslogd/klogd: done
_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|
Arago Project j721s2-evm /dev/ttyS2
Arago 2021.09 j721s2-evm /dev/ttyS2
j721s2-evm login: [ 31.819600] tlv71033: disabling
Linux cannot enter the system,mmc0: running CQE recovery error is reported
NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb3-dirty
NOTICE: BL31: Built : 17:56:46, Mar 1 2023
I/TC:
I/TC: OP-TEE version: 3.20.0 (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #1 Wed Mar 1 17:56:56 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[ 0.000000] Linux version 5.10.162-g76b3e88d56 (jjh@jjh-QiTianM437-N000) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1 SMP PREEMPT Sat May 27 10:52:15 CST 2023
[ 0.000000] Machine model: Texas Instruments J721S2 EVM
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002880000 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 31 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a4000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 31 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a4100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a6000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a6100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a7000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a7100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 32 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-rtos-ipc-memory-region@a8000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000aa000000, size 96 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-dma-memory@aa000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-c71-dma-memory@b0000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b0100000, size 95 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-c71_0-memory@b0100000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b6000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-dma-memory@b6000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b6100000, size 31 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-memory@b6100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000d8000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-lo@d8000000, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000880000000, size 704 MiB
[ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-hi@880000000, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000b7ffffff]
[ 0.000000] node 0: [mem 0x00000000b8000000-0x00000000d7ffffff]
[ 0.000000] node 0: [mem 0x00000000d8000000-0x00000000dbffffff]
[ 0.000000] node 0: [mem 0x00000000dc000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] cma: Reserved 512 MiB at 0x00000000dd000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 22 pages/cpu s50392 r8192 d31528 u90112
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x2880000 root=/dev/mmcblk0p2 r w rootfstype=ext4 rootwait
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 506476K/2097152K available (11200K kernel code, 1160K rwdata, 4300K rodata, 1856K init, 433K bss, 1066388K reserved, 524288K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @81c00000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000081430000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000081440000
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000001] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.008380] Console: colour dummy device 80x25
[ 0.012945] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.023617] pid_max: default: 32768 minimum: 301
[ 0.028371] LSM: Security Framework initializing
[ 0.033121] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.040690] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.049588] rcu: Hierarchical SRCU implementation.
[ 0.054668] Platform MSI: msi-controller@1820000 domain created
[ 0.060873] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.070173] EFI services will not be available.
[ 0.074906] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.089990] Detected PIPT I-cache on CPU1
[ 0.090015] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[ 0.090028] GICv3: CPU1: using allocated LPI pending table @0x0000000081450000
[ 0.090067] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[ 0.090121] smp: Brought up 1 node, 2 CPUs
[ 0.119469] SMP: Total of 2 processors activated.
[ 0.124275] CPU features: detected: 32-bit EL0 Support
[ 0.129530] CPU features: detected: CRC32 instructions
[ 0.144113] CPU: All CPU(s) started at EL2
[ 0.148316] alternatives: patching kernel code
[ 0.153459] devtmpfs: initialized
[ 0.161229] KASLR disabled due to lack of seed
[ 0.165892] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.175859] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.190288] pinctrl core: initialized pinctrl subsystem
[ 0.195986] DMI not present or invalid.
[ 0.200270] NET: Registered protocol family 16
[ 0.205690] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.212955] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.220929] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.229259] thermal_sys: Registered thermal governor 'step_wise'
[ 0.229262] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.235867] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.249512] ASID allocator initialised with 32768 entries
[ 0.266941] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.273801] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.280649] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.287494] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.295028] cryptd: max_cpu_qlen set to 1000
[ 0.301102] k3-chipinfo 43000014.chipid: Family:J721S2 rev:SR1.0 JTAGID[0x0bb7502f] Detected
[ 0.310253] vsys_3v3: supplied by evm_12v0
[ 0.314653] vsys_5v0: supplied by evm_12v0
[ 0.319392] iommu: Default domain type: Translated
[ 0.324593] SCSI subsystem initialized
[ 0.328663] mc: Linux media interface: v0.10
[ 0.333048] videodev: Linux video capture interface: v2.00
[ 0.338685] pps_core: LinuxPPS API ver. 1 registered
[ 0.343758] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.353097] PTP clock support registered
[ 0.357115] EDAC MC: Ver: 3.0.0
[ 0.360921] FPGA manager framework
[ 0.364447] Advanced Linux Sound Architecture Driver Initialized.
[ 0.371090] clocksource: Switched to clocksource arch_sys_counter
[ 0.377429] VFS: Disk quotas dquot_6.6.0
[ 0.381463] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.391195] Carveout Heap: Exported 512 MiB at 0x00000000b8000000
[ 0.397492] NET: Registered protocol family 2
[ 0.402121] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.410363] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.419112] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.427265] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.434874] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.441671] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.448548] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.455934] NET: Registered protocol family 1
[ 0.460668] RPC: Registered named UNIX socket transport module.
[ 0.466730] RPC: Registered udp transport module.
[ 0.471546] RPC: Registered tcp transport module.
[ 0.476350] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.482932] NET: Registered protocol family 44
[ 0.487479] PCI: CLS 0 bytes, default 64
[ 0.491845] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.502350] Initialise system trusted keyrings
[ 0.506987] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.515216] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.521444] NFS: Registering the id_resolver key type
[ 0.526684] Key type id_resolver registered
[ 0.530957] Key type id_legacy registered
[ 0.535087] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.541940] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.549587] 9p: Installing v9fs 9p2000 file system support
[ 0.574818] Key type asymmetric registered
[ 0.579007] Asymmetric key parser 'x509' registered
[ 0.584009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.591568] io scheduler mq-deadline registered
[ 0.596193] io scheduler kyber registered
[ 0.601617] pinctrl-single 4301c000.pinctrl: 101 pins, size 404
[ 0.607832] pinctrl-single 11c000.pinctrl: 72 pins, size 288
[ 0.618069] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[ 0.630701] brd: module loaded
[ 0.637577] loop: module loaded
[ 0.641426] megasas: 07.714.04.00-rc1
[ 0.647145] tun: Universal TUN/TAP device driver, 1.6
[ 0.652603] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.659011] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.665086] sky2: driver version 1.30
[ 0.669419] VFIO - User Level meta-driver version: 0.3
[ 0.675232] i2c /dev entries driver
[ 0.679590] sdhci: Secure Digital Host Controller Interface driver
[ 0.685911] sdhci: Copyright(c) Pierre Ossman
[ 0.690536] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.696839] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.703184] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.710532] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 0.715102] optee: revision 3.20 (8e74d476)
[ 0.731537] optee: dynamic shared memory is enabled
[ 0.741009] optee: initialized driver
[ 0.746071] NET: Registered protocol family 17
[ 0.750708] 9pnet: Installing 9P2000 support
[ 0.755114] Key type dns_resolver registered
[ 0.759569] Loading compiled-in X.509 certificates
[ 0.771851] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0008 '8.6.3--v08.06.03 (Chill Capybar')
[ 0.799047] omap_i2c 40b00000.i2c: bus 0 rev0.12 at 100 kHz
[ 0.805192] omap_i2c 40b10000.i2c: bus 1 rev0.12 at 100 kHz
[ 0.811628] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 125 domain created
[ 0.820176] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 148 domain created
[ 0.829510] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 227 domain created
[ 0.838162] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 265 created
[ 0.848239] ti-udma 311a0000.dma-controller: Number of rings: 48
[ 0.855012] ti-udma 311a0000.dma-controller: Channels: 24 (bchan: 0, tchan: 8, rchan: 16)
[ 0.864315] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:272
[ 0.874207] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
[ 0.880974] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64
[ 0.889869] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[878,128] sci-dev-id:259
[ 0.900044] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
[ 0.906804] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64
[ 0.914503] omap8250 40a00000.serial: failed to get alias
[ 0.920691] printk: console [ttyS2] disabled
[ 0.925099] 2880000.serial: ttyS2 at MMIO 0x2880000 (irq = 19, base_baud = 3000000) is a 8250
[ 0.933852] printk: console [ttyS2] enabled
[ 0.933852] printk: console [ttyS2] enabled
[ 0.942294] printk: bootconsole [ns16550a0] disabled
[ 0.942294] printk: bootconsole [ns16550a0] disabled
[ 0.953801] cadence-qspi 47040000.spi: error -ENODEV: No Rx DMA available
[ 0.960851] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[ 0.967721] spi-nor: probe of spi0.0 failed with error -2
[ 0.976289] davinci_mdio c200f00.mdio: Configuring MDIO in manual mode
[ 1.019092] davinci_mdio c200f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.026998] mdio_bus c200f00.mdio: MDIO device at address 0 is missing.
[ 1.033638] am65-cpsw-nuss c200000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000
[ 1.046403] am65-cpsw-nuss c200000.ethernet: Use random MAC address
[ 1.052663] am65-cpsw-nuss c200000.ethernet: initialized cpsw ale version 1.4
[ 1.059782] am65-cpsw-nuss c200000.ethernet: ALE Table size 64
[ 1.065997] am65-cpsw-nuss c200000.ethernet: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0
[ 1.076249] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010c, freq:200000000, add_val:4 pps:0
[ 1.185862] mmc0: CQHCI version 5.10
[ 1.190576] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fca100
[ 1.197408] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fca100
[ 1.204212] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fca100
[ 1.211014] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fca100
[ 1.218145] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
[ 1.225704] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit
[ 1.228137] ti-udma 31150000.dma-controller: Channels: 60 (tchan: 30, rchan: 30, gp-rflow: 16)
[ 1.244993] davinci_mdio c200f00.mdio: Configuring MDIO in manual mode
[ 1.291097] davinci_mdio c200f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.299008] mdio_bus c200f00.mdio: MDIO device at address 0 is missing.
[ 1.305662] am65-cpsw-nuss c200000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000
[ 1.318434] am65-cpsw-nuss c200000.ethernet: Use random MAC address
[ 1.324706] am65-cpsw-nuss c200000.ethernet: initialized cpsw ale version 1.4
[ 1.331832] am65-cpsw-nuss c200000.ethernet: ALE Table size 64
[ 1.338050] am65-cpsw-nuss c200000.ethernet: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0
[ 1.348090] am65-cpsw-nuss c200000.ethernet: set new flow-id-base 82
[ 1.356747] mmc0: Command Queue Engine enabled
[ 1.361195] mmc0: new high speed MMC card at address 0001
[ 1.367546] debugfs: Directory 'pd:39' with parent 'pm_genpd' already present!
[ 1.367711] mmcblk0: mmc0:0001 8GUF4R 7.28 GiB
[ 1.374845] debugfs: Directory 'pd:38' with parent 'pm_genpd' already present!
[ 1.379379] mmcblk0boot0: mmc0:0001 8GUF4R partition 1 31.9 MiB
[ 1.387035] debugfs: Directory 'pd:276' with parent 'pm_genpd' already present!
[ 1.392495] mmcblk0boot1: mmc0:0001 8GUF4R partition 2 31.9 MiB
[ 1.400266] debugfs: Directory 'pd:154' with parent 'pm_genpd' already present!
[ 1.405747] mmcblk0rpmb: mmc0:0001 8GUF4R partition 3 4.00 MiB, chardev (237:0)
[ 1.416856] ALSA device list:
[ 1.423222] No soundcards found.
[ 1.426657] mmcblk0: p1 p2
[ 1.434944] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 1.442289] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 1.457308] EXT4-fs (mmcblk0p2): recovery complete
[ 1.462962] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.471079] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.478762] devtmpfs: mounted
[ 1.482630] Freeing unused kernel memory: 1856K
[ 1.487272] Run /sbin/init as init process
[ 1.512473] mmc0: running CQE recovery
[ 1.519317] mmc0: running CQE recovery
[ 1.526125] mmc0: running CQE recovery
[ 1.530029] blk_update_request: I/O error, dev mmcblk0, sector 1392192 op 0x0:(READ) flags 0x80700 phys_seg 15 prio class 0
[ 1.544573] mmc0: running CQE recovery
[ 1.551378] mmc0: running CQE recovery
[ 1.558185] mmc0: running CQE recovery
[ 1.562088] blk_update_request: I/O error, dev mmcblk0, sector 1393480 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.575925] mmc0: running CQE recovery
[ 1.582379] mmc0: running CQE recovery
[ 1.588835] mmc0: running CQE recovery
[ 1.592734] blk_update_request: I/O error, dev mmcblk0, sector 1393256 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.606951] mmc0: running CQE recovery
[ 1.613773] mmc0: running CQE recovery
[ 1.620593] mmc0: running CQE recovery
[ 1.624493] blk_update_request: I/O error, dev mmcblk0, sector 1392824 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.638895] mmc0: running CQE recovery
[ 1.645702] mmc0: running CQE recovery
[ 1.652503] mmc0: running CQE recovery
[ 1.656406] blk_update_request: I/O error, dev mmcblk0, sector 1392488 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.670071] mmc0: running CQE recovery
[ 1.675579] mmc0: running CQE recovery
[ 1.681087] mmc0: running CQE recovery
[ 1.684984] blk_update_request: I/O error, dev mmcblk0, sector 1392056 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.698541] mmc0: running CQE recovery
[ 1.704210] mmc0: running CQE recovery
[ 1.709876] mmc0: running CQE recovery
[ 1.713773] blk_update_request: I/O error, dev mmcblk0, sector 1391904 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
INIT: version 2.96 booting
[ 1.767026] mmc0: running CQE recovery
[ 1.773261] mmc0: running CQE recovery
[ 1.779470] mmc0: running CQE recovery
[ 1.783377] blk_update_request: I/O error, dev mmcblk0, sector 1393736 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 1.794409] blk_update_request: I/O error, dev mmcblk0, sector 1393448 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 1.812603] mmc0: running CQE recovery
[ 1.818041] mmc0: running CQE recovery
[ 1.823454] mmc0: running CQE recovery
[ 1.827364] blk_update_request: I/O error, dev mmcblk0, sector 1298728 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 1.842099] mmc0: running CQE recovery
[ 1.848936] mmc0: running CQE recovery
[ 1.855759] mmc0: running CQE recovery
[ 1.863031] mmc0: running CQE recovery
[ 1.869342] mmc0: running CQE recovery
[ 1.875637] mmc0: running CQE recovery
[ 1.882631] mmc0: running CQE recovery
[ 1.889178] mmc0: running CQE recovery
[ 1.895723] mmc0: running CQE recovery
[ 1.907879] mmc0: running CQE recovery
[ 1.914693] mmc0: running CQE recovery
[ 1.921510] mmc0: running CQE recovery
[ 1.945205] mmc0: running CQE recovery
[ 1.949195] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040
[ 1.957970] Mem abort info:
[ 1.960770] ESR = 0x96000004
[ 1.963817] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.969119] SET = 0, FnV = 0
[ 1.972164] EA = 0, S1PTW = 0
[ 1.975297] Data abort info:
[ 1.978165] ISV = 0, ISS = 0x00000004
[ 1.981992] CM = 0, WnR = 0
[ 1.984952] user pgtable: 4k pages, 48-bit VAs, pgdp=000000008313f000
[ 1.991377] [0000000000000040] pgd=0000000000000000, p4d=0000000000000000
[ 1.998156] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 2.003712] Modules linked in:
[ 2.006757] CPU: 0 PID: 68 Comm: kworker/0:1H Not tainted 5.10.162-g76b3e88d56 #1
[ 2.014218] Hardware name: Texas Instruments J721S2 EVM (DT)
[ 2.019869] Workqueue: kblockd blk_mq_run_work_fn
[ 2.024559] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--)
[ 2.030551] pc : __blk_rq_map_sg+0x80/0x500
[ 2.034721] lr : mmc_queue_map_sg+0x3c/0x60
[ 2.038888] sp : ffff8000118539e0
[ 2.042188] x29: ffff8000118539e0 x28: ffff000003013000
[ 2.047485] x27: 0000000000000000 x26: ffff800011853ab0
[ 2.052781] x25: 0000000000000000 x24: ffff0000031a6600
[ 2.058077] x23: ffff000003009e40 x22: 000000000001f30a
[ 2.063373] x21: 0000000000000004 x20: ffff00000285bdc0
[ 2.068669] x19: ffff000002400e40 x18: 0000000000000010
[ 2.073965] x17: 0000000000000000 x16: 0000000000000000
[ 2.079261] x15: 00000149a1a313c8 x14: 0000000000000256
[ 2.084556] x13: 000000000000023b x12: 0000000000000001
[ 2.089853] x11: 000000000139abe9 x10: 00000000000009f0
[ 2.095148] x9 : 0000000000000004 x8 : ffff00000300a0c0
[ 2.100444] x7 : 0000000000000000 x6 : 0000000000000000
[ 2.105740] x5 : 0000000000000200 x4 : 0000000000000000
[ 2.111036] x3 : ffff800011853ab0 x2 : 0000000000000040
[ 2.116332] x1 : ffff000003009e40 x0 : 0000000000000040
[ 2.121629] Call trace:
[ 2.124065] __blk_rq_map_sg+0x80/0x500
[ 2.127887] mmc_queue_map_sg+0x3c/0x60
[ 2.131709] mmc_blk_data_prep+0x1a8/0x340
[ 2.135790] mmc_blk_mq_issue_rq+0x478/0x8a0
[ 2.140043] mmc_mq_queue_rq+0x118/0x2b0
[ 2.143950] blk_mq_dispatch_rq_list+0x104/0x778
[ 2.148553] __blk_mq_sched_dispatch_requests+0xd4/0x1a0
[ 2.153848] blk_mq_sched_dispatch_requests+0x38/0x78
[ 2.158882] __blk_mq_run_hw_queue+0xac/0x128
[ 2.163223] blk_mq_run_work_fn+0x20/0x30
[ 2.167220] process_one_work+0x1a0/0x328
[ 2.171215] worker_thread+0x4c/0x420
[ 2.174862] kthread+0x140/0x160
[ 2.178077] ret_from_fork+0x10/0x34
[ 2.181640] Code: f9403704 d37c7ea0 2a1503e9 8b000082 (f860688b)
[ 2.187716] ---[ end trace 7657652449c3712c ]---
We modified mmc0 to hs200 mode and it still does not work. mmc0: running CQE recovery error is reported
k3-j721s2-main.dtsi
Modify the root=/dev/mmcblk0p2 of the app's dts and start it in sd mode
Start the rootfs partition of emmc through the app of the BOOT partition of sd, and you can enter the system normally,no mmc0: running CQE recovery error reported
Try 3:
modified root=/dev/mmcblk0p2 to root=/dev/mmcblk1p2,
Switch to the EMMC boot0 mode to start, and use the boot0 (sbl)app to pull up the rootfs of SD, which can stably enter the system,no mmc0: running CQE recovery error reported
Try 4:
We have also started EMMC through SPL and can operate normally,no mmc0: running CQE recovery error reported
Can you give us some suggestions to help us solve this problem? Thank you