Tool/software:
Hi,
Just wanted to get some clarification on DDR3 Memory design for the AM5729. I was just wondering if it is supported to have 2 x 4GB DDR3 Memory devices setup in a daisy chain topology into EMIF1. I have seen some forum posts that seem to suggest that 2GB is the maximum supported memory into a single EMIF.
Kind Regard,
Jared
Hello Jared,
Please see the DDR3 documentation o9n the Datasheet: https://www.ti.com/lit/ds/symlink/am5728.pdf
I was just wondering if it is supported to have 2 x 4GB DDR3 Memory devices setup in a daisy chain topology into EMIF1
Your question is answered on the overview:
Please read the following chapter for additional guidance:
8.2 DDR3 Board Design and Layout Guidelines
If you have any additional questions, feel free to reopen this thread or open a new one!
Best,
Josue
