J721EXSOMXEVM: Regarding Access of OSPI flash sectors during OSPI boot up mode

Pradeep R

Part Number: J721EXSOMXEVM

Tool/software:

Hello Team,

we are using the MCAL package MCUSW_09_00_00_15_CONFIG + ti-processor-sdk-rtos-j721e-evm-09_00_00_02

When we are integrating SBL and tifs.bin from TI and booting from OSPI, as we see below SBL is flashed at offset zero of OSPI , tifs.bin at offset 0x80000 of OSPI and App image at offset of 0x100000 of OSPI , so our doubt if we are accessing these many areas of OSPI then even application also needs some flash area to access it for its operation. In Fls confifuration, the Fls sector address is always start address of OSPI , So OSPI start address overlaps with SBL which already present. In this Case, how to resolve this Issue?

Regards,

Pradeep R

12 days ago

0 Karthikeyan S 11 days ago

TI__Expert 5910 points

Hi Pradeep,

Pradeep R said:
In Fls confifuration, the Fls sector address is always start address of OSPI , So OSPI start address overlaps with SBL which already present. In this Case, how to resolve this Issue?

I have looped in our AUTOSAR expert to provide inputs to your issue.

Regards,

Karthik

0 Pradeep R 11 days ago in reply to Karthikeyan S

Intellectual 825 points

Hello Karthik,

Thankyou for looping Autosar Expert.

we have another query, when we debugged SBL and our application together, we got know that already OSPI init is called in SBL of Ti and also our application will call Fls_Init which internally Calls OSPI Init.

May i know, how we can avoid this?

Regards,

Pradeep R

0 Pradeep R 6 days ago in reply to Pradeep R

Intellectual 825 points

Hello Karthik,

Any feedback here.

Regards,

Pradeep R

0 Pradeep R 4 days ago in reply to Pradeep R

Intellectual 825 points

Hello Karthik,

Any feedback here.

Regards,

Pradeep R

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Processors

Processors forum

J721EXSOMXEVM: Regarding Access of OSPI flash sectors during OSPI boot up mode