• State
  • Replies 1 reply
  • Subscribers 101 subscribers
  • Views 44 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

CCSTUDIO: ‌XDS200 Driver Issue

?? ?
Prodigy 10 points
Part Number: CCSTUDIO

Tool/software:

Hi,

I have a TMS320F28379 control board and an XDS200 emulator. The onboard emulator of the 28379 control board can be recognized and used normally, but the XDS200 emulator only recognizes the serial port and the driver is not recognized correctly, so it cannot be used for emulation. I've tried several computers but none of them can recognize it correctly, they all only show "USB Composite Device". Running the Blackhawk Control Panel also doesn't recognize the XDS200.

Regards,

anono

  • 0
    TI__Guru**** 438501 points

    Hello,

    In your 3rd screenshot, it looks like the XDS200 is being detected correctly in device manager. Note that the Blackhawk Control Panel is for the XDS560 based probes.

    ?? ? said:
    the XDS200 emulator only recognizes the serial port and the driver is not recognized correctly, so it cannot be used for emulation

    Have you tried starting a CCS debug session using the XDS200?

    Thanks

    ki