[FAQ] TDA4VM: Latest FAQs on TDA4

Karan Saxena

Part Number: TDA4VM
Other Parts Discussed in Thread: TDA2, , DRA829, DRA829V,

This thread will summarize the latest FAQs on TDA4 on a quarterly basis – these are usually the most viewed threads and augment the SDK collateral.

To make the navigation easy, we have also added the domain to help you find the FAQs easily.

Most update list of FAQs can be found at this link
SDK collateral is still the first place to get all the information:
There are other FAQs also present in the SDK collateral itself keep these links handy:

over 1 year ago

0 Karan Saxena over 1 year ago

TI__Mastermind 27131 points

#	FAQ title	E2E forum link	Component	SoC
1	How to flip images on TDA2x/TDA3x/TDA4x?	https://e2e.ti.com/support/processors/f/791/t/949154	Display	TDA4, TDA3, TDA2
2	TDA4VM: Different ways to load an RTOS or Baremetal application along with Linux	https://e2e.ti.com/support/processors/f/791/t/915474	R5 Firmware, Integrated usecase	TDA4
3	TDA4VM: makefile based project which shows A72, C7x, R5F setup along with IPC and buffer passing between Linux+RTOS	https://e2e.ti.com/support/processors/f/791/t/909695	IPC, Vision Apps	TDA4
4	TDA4VM: How do I reduce the size of the Yocto filesystem to meet my needs	https://e2e.ti.com/support/processors/f/791/t/915887	Yocto	TDA4
5	TDA4VM/DRA829/AM65xx: Linux: Configuring GPIOs	https://e2e.ti.com/support/processors/f/791/t/918654	GPIO, Linux	TDA4
6	TDA4VM: CAN: How is bit-rate calculated for CAN	https://e2e.ti.com/support/processors/f/791/t/920090	CAN, AUTOSAR	TDA4
7	TDA4VM: How can I use CAN on Linux	https://e2e.ti.com/support/processors/f/791/t/922168	CAN, Linux	TDA4
8	TDA4VM: Routing interrupts via the interrupt router	e2e.ti.com/.../931985	Interrupt routers	TDA4
9	TDA4VM: How to debug from Linux command line	https://e2e.ti.com/support/processors/f/791/t/935342	Debug	TDA4
10	DRA829V/TDA4VM: How can I check if cache is enabled or not for R5F	https://e2e.ti.com/support/processors/f/791/t/949471	Cache, R5F	TDA4
11	TDA4VM: How to check if R5F is in lock-step or split mode	https://e2e.ti.com/support/processors/f/791/t/966564	R5F	TDA4
12	TDA4VM: How can I load remote core firmware from OSPI	https://e2e.ti.com/support/processors/f/791/t/950919	R5 Firmware, OSPI	TDA4
13	TDA4VM: How to modify offsets for boot binaries in eMMC	https://e2e.ti.com/support/processors/f/791/t/950948	eMMC, u-boot	TDA4
14	TDA4VM: How can I confirm primary and secondary boot mode on custom board	https://e2e.ti.com/support/processors/f/791/t/950946	Bootmodes	TDA4
15	TDA4VM: Application in the PSDKRA runs standalone from SBL but doesn't run alongside Linux	https://e2e.ti.com/support/processors/f/791/t/931992	Integrated usecase	TDA4
16	TDA4VM: How to load firmware using R5 SPL from eMMC	https://e2e.ti.com/support/processors/f/791/t/944099	R5 Firmware	TDA4
17	TDA4VM: How to read on-die temperature?	https://e2e.ti.com/support/processors/f/791/t/922224	PSDKRA, Thermal support	TDA4
18	TDA4VM: Pinmux Guide for Jacinto Processors	https://e2e.ti.com/support/processors/f/791/t/927526	PSDKLA/PSDKRA - Pinmux	TDA4
19	TDA4VM: How to view c6x trace buffer from Linux?	https://e2e.ti.com/support/processors/f/791/t/931381	PSDKLA/PSDKRA, remoteproc	TDA4
20	TDA4VM: Custom TDA4VM Boot stuck at A72 SPL: "spl: mmc init failed with error: - 110"	https://e2e.ti.com/support/processors/f/791/t/943299	PSDKLA - Boot	TDA4
21	TDA4VM: How to use SPI/SPI_DEV on TDA4/J721E?	https://e2e.ti.com/support/processors/f/791/t/947437	PSDKLA SPI	TDA4
22	TDA4: How to boot to u-boot using eMMC	https://e2e.ti.com/support/processors/f/791/t/886980	PSDKLA u-boot	TDA4
23	TDA4: How do I determine the GPIO number within linux for a pin within the schematic?	https://e2e.ti.com/support/processors/f/791/t/948888	PSDKLA/RA Linux	TDA4
24	TDA4VM: How to enable RTC on Jacinto TDA4x EVM?	https://e2e.ti.com/support/processors/f/791/t/959163	TDA4/RTC	TDA4
25	PROCESSOR-SDK-DRA8X-TDA4X: How to use eMMC based filesystem on PSDKQA release?	https://e2e.ti.com/support/processors/f/791/t/922567	QNX, eMMC	TDA4
26	TDA4VM: How to do a run time logging of events in an OpenVX application?	https://e2e.ti.com/support/processors/f/791/t/930770	Performace	TDA4
27	PROCESSOR-SDK-DRA8X-TDA4X: Multi channel processing in OpenVX	https://e2e.ti.com/support/processors/f/791/t/920477	OpenVx	TDA4
28	Yocto build error for recipe iso-codes in PSDKLA_07.00.00.04	https://e2e.ti.com/support/processors/f/791/t/924508	Yocto	TDA4
29	PROCESSOR-SDK-DRA8X-TDA4X: OpenVX application hangs with pipelining	https://e2e.ti.com/support/processors/f/791/t/924559	OpenVx	TDA4
30	TDA4VM: How to get CPSW9G virtual interface functional on TDA4x/DRA8x SDK versions 7.0 onward?	https://e2e.ti.com/support/processors/f/791/t/929577	CPSW9G	TDA4
31	DRA829VXEVM: Is it possible to connect two DRA829 EVMs via SGMII	https://e2e.ti.com/support/processors/f/791/t/936840	SGMII	TDA4
32	DRA829V: How do I find documentation for Linux Kernel device tree files	https://e2e.ti.com/support/processors/f/791/t/937619	Platform (Linux)	TDA4
33	How to detect erroneous input frame in VIP?	https://e2e.ti.com/support/processors/f/791/t/931974	VIP	TDA4
34	How to run multi-cam usecase for YUV sensors?	https://e2e.ti.com/support/processors/f/791/t/931988	Multi-cam, YUV	TDA4
35	How to configure DSS for BT656 or BT1120 output format?	https://e2e.ti.com/support/processors/f/791/t/931993	DSS, BT656, BT1120	TDA4
36	TDA4VM: how to configure C7x DSP frequency to match different TDA4VM variant	https://e2e.ti.com/support/processors/f/791/t/928867	Board	TDA4
37	PROCESSOR-SDK-DRA8X-TDA4X: How to use IPC Example Application Echo Test on PSDKQA7.0	https://e2e.ti.com/support/processors/f/791/t/932825	IPC, QNX	TDA4
38	PROCESSOR-SDK-DRA8X-TDA4X: Ethernet LLD replacing CPSW LLD	https://e2e.ti.com/support/processors/f/791/t/935547	CPSW, Ethernet	TDA4
39	How to flash OSPI using CCS & JTAG interface	https://e2e.ti.com/support/processors/f/791/t/942139	OSPI Flashing	TDA4
40	How to change display resolution in vision apps	https://e2e.ti.com/support/processors/f/791/t/942679	Display	TDA4
41	Getting traces on Lauterbach using DCC	https://e2e.ti.com/support/processors/f/791/t/949218	Lauterbach/DCC	TDA4
42	Is there a guide to choosing the right OSPI Flash parts that are supported on Jacinto 7?	https://e2e.ti.com/support/processors/f/791/t/946418	OSPI	TDA4
43	How to add new memory section in vision apps	https://e2e.ti.com/support/processors/f/791/t/943406	Vision Apps	TDA4
44	How to enable DMA in OSPI and improve OSPI read performance in SBL and BootApp?	https://e2e.ti.com/support/processors/f/791/t/946654	OSPI, SBL, BootApp	TDA4
45	TDA4VM: How to resolve Yocto build failure while trying to fetch repository?	https://e2e.ti.com/support/processors/f/791/t/948986	Yocto	TDA4
46	How to change output to vout1 in vision apps	https://e2e.ti.com/support/processors/f/791/t/949461	Display	TDA4
47	how to use QT & wayland in VissionApp?	https://e2e.ti.com/support/processors/f/791/t/950630	Display	TDA4
48	How to enable third display ie TIVX_TARGET_DISPLAY3 in vision apps?	https://e2e.ti.com/support/processors/f/791/t/954679	Display	TDA4
49	How to build spl, uboot for HS device	https://e2e.ti.com/support/processors/f/791/t/958666	uboot-spl	TDA4
50	How to build sysfw.itb for HS device	https://e2e.ti.com/support/processors/f/791/t/963964	sysfw	TDA4
51	What is the difference between SK-TDA4VM and the TDA4VM EVM?	https://e2e.ti.com/support/processors/f/791/t/1083612	SDK	TDA4
52	Maximum pressure or force allowed on package lid of SoC	https://e2e.ti.com/support/processors/f/791/t/1089203	HW	AM57, DRA6, DRA7, TDA2, TDA3, TDA4

The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

Processors

Processors forum

[FAQ] TDA4VM: Latest FAQs on TDA4