The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] DRA722: Steps to add EMMC early boot support in vision SDK 3.8 or PSDKLA 6

Part Number: DRA722

Hi, 

Default only SD boot mode is supported for the early boot use-case, so can I know the changes to add the EMMC early boot ?