Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM62L32, AM62L31: PORz and RTC_PORz slew rate

    Part Number: AM62L Tool/software: Hi TI Experts, Usually add RC filter on RESET signal to anti-noise, but the slew rate requirement of RESET signal on AM62x datasheet is quite sharp, on customer board it is about 10V-100V/ms, can it meet AM62x reset requirement…

  • [FAQ] TDA4VH-Q1: Enable Display Frame Freeze safety feature in openvx

    Part Number: TDA4VH-Q1 Tool/software: DSS includes a hardware-enabled freeze frame checker at each pipeline output and vp output. When enabled, it generates a data signature of pixels from a user define region for each frame. The current frame signature…

  • [FAQ] AM62L32, AM62L31 Design Recommendations / Custom board hardware design – Guidelines and E2E query links for custom board designers to refer

    Part Number: AM62L Tool/software: Hi TI Experts I see the below status on TI.com for AM62L Can you provide additional inputs on the collaterals to be referred or guidelines to follow during custom board design

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM64x / AM243x / AM62Ax / AM62Px / AM62D-Q1 / AM62L - Supported bootmode configurations

    Part Number: AM62L Other Parts Discussed in Thread: AM62D-Q1 , AM625 , AM623 , AM620-Q1 Tool/software: Hi TI experts help me understand the supported bootmode configurations for the below family of processors AM625 / AM623 / AM620-Q1 / AM64x / AM243x /…

  • [FAQ] AM62L32, AM62L31 Design Recommendations / Custom board hardware design – Queries regarding power architecture including PMIC

    Part Number: AM62L Other Parts Discussed in Thread: TPS65214 Tool/software: Hi TI Experts, I am designing custom board using AM62L. Can you provide your inputs on the supported power architecture when custom board design is configured for RTC mode or…

  • [FAQ] AM62P: How to Fix Missing TIFSSTUB to enable Low Power Modes in Linux SDK 10.0/10.1?

    Part Number: AM62P Tool/software: I've successfully tested low power modes on AM62P using the default images. But I've tried to build my own U-Boot images, but now low power modes are not working. What is the cause and solution to this?

  • [FAQ] AM62L32 / AM62L31: Why is MMC1 powered by two different voltage supplies, VDDSHV1 and VDDSHV3 ?

    Part Number: AM62L Tool/software: Hi TI Experts, Could you confirm that the voltage domains are correct for the MMC1_SDCD and MMC1_SDWP pins? The datasheet shows both MMC0 and MMC2 as having all member pins bellowing to the same voltage domain. For MMC1…

  • [FAQ] TDA4VM: How to address the gPTP Sync failure post reset recovery of CPSW in Ethenret Firmware?

    Part Number: TDA4VM Tool/software: After a CPSW reset recovery from ETHFW, gPTP fails to re-establish synchronization, impacting time-sensitive applications.

  • [FAQ] SK-AM64B: Building and Booting an UBIFS-based Linux rootfs from OSPI NOR Flash using TI Processor SDK Linux v11.x Yocto Sources

    Part Number: SK-AM64B Other Parts Discussed in Thread: SK-AM62B Tool/software: Overview The TI SK-AM64B EVM has an on-board 64MB-sized OSPI Flash chip that can be used to boot the AM64x device from. The documentation associated with SDK v11.0 contains…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM64x / AM243x / AM62Ax / AM62Px / AM62D-Q1 / AM62L - .alg (ASCII) file for use with Altium tool

    Part Number: AM62P Other Parts Discussed in Thread: SK-AM62B-P1 , SK-AM62-LP , SK-AM62B , SK-AM62-SIP , SK-AM62A-LP , , AM62L , SK-TDA4VM Tool/software: Hi Board Designers, Refer below query related to availability of ASCII (.alg) file for Altium tool Can you…

View FAQ threads
  • Threads 194077 Discussions