Code Composer studio 8.3.1 Adding Compiler

Daniel Mejia

I have been trying to add the compiler version 20.2.1.LTS to code composer studio 8.3.1! I have installed the tool manually and the tool does not recognized the driver. I am out of ideas, I am running a 32-bit windows 7 machine. Also, I tried the CCS store, it did not work!

over 3 years ago

0 Ki over 3 years ago

TI__Guru**** 451431 points

Hello,

Daniel Mejia said:
I have installed the tool manually and the tool does not recognized the driver.

Please see the section "Compiler Discovery" in the below article:

https://software-dl.ti.com/ccs/esd/documents/ccs_compiler-installation-selection.html#compiler-discovery

Thanks

0 Daniel Mejia over 3 years ago

Prodigy 10 points

Even after adding the path, the tool does not show the version! I was wondering if there was another issues.

0 Ki over 3 years ago in reply to Daniel Mejia

TI__Guru**** 451431 points

Did you press the "Refresh" button?

Can you provide a screenshot of the Compiler dialog (please show the relevant data in the dialog)?

Thanks

+1 Daniel Mejia over 3 years ago in reply to Ki

Prodigy 10 points

I found the issue, the drivers are not properly documented! ti-cgt-c2000_20.2.1.LTS compiler driver is only available for Code Composer Studio 10. They should document the drivers and Software needed together.

Code Composer Studio™︎

Code Composer Studio forum

Code Composer studio 8.3.1 Adding Compiler