How can I make .syscfg file in the new CCS project?

shotaro.tanaka

Other Parts Discussed in Thread: SYSCONFIG, MSPM0G3507

Hi, Gentleman

My name is Tanaka.

I make the new CCS project in the CSS tab: Project->New CCS Project. Set Target(MSPM0), MSPMG1507 -> set the project name -> Finish. And I can find the new project folder in Project Explorer window.

But I cannot find the new .syscfg file in that new project folder. I expected some blank .syscfg file will be in it, and start to edit it by SysConfig application that is defined in the project properties.

Please teach me how can I make the new .syscfg file?

Kind regards

over 1 year ago

0 Ki over 1 year ago

TI__Guru**** 451311 points

Tanaka-san,

shotaro.tanaka said:
Please teach me how can I make the new .syscfg file?

Right-click on the project and select "New -> Other" in the context menu.

Then in the new file wizard, expand "General" and select "File". Then select the project and give the file a name. If you give it a *.syscfg file extension, it will create a blank *.syscfg file in the project and the project will be converted to a sysconfig project. If you then try to open the blank *.syscfg file in the editor, CCS will open the sysconfig editor tool.

Thank you

0 shotaro.tanaka over 1 year ago in reply to Ki

Prodigy 120 points

Hi, KI-san, Gentleman

Thank you every time for your support. I could make the new syscfg file and add program in new project and build it.

As showe below, I found an error that ti/devices/msp/msp.h is not found.

I use MSPM0SDK_1_00_05, and SysConfig 1.17.0, CCS is 12.4.0. I can find ithat file in ti\mspm0_sdk_1_00_01_03\source\ti\devices\msp folder.

I added include path, but it still shows an error.

Is it needed any additional setting on CCS?

Please advice me.

Kind regards

error02.pptx

0 Ki over 1 year ago in reply to shotaro.tanaka

TI__Guru**** 451311 points

Tanaka-san,

shotaro.tanaka said:
As showe below, I found an error that ti/devices/msp/msp.h is not found.

The below include search path needs to be added:

<MSPM0 SDK ROOT INSTALL DIRECTORY>\source

For example:

C:\ti\mspm0_sdk_1_10_00_05\source

Thank you

0 shotaro.tanaka over 1 year ago in reply to Ki

Prodigy 120 points

Hi, KI-san

Thank you again for appropriate answer. I added file path. It happened again that 'core_cm0plus.h' file not found, so I added another file path c:\ti\mspm0_sdk_1_10_00_05\source\third_party\CMSIS\Core|include. After that, this error is solved, but it showed anoter error showed elow.

error04.pptx

It seems that DL library symbol setting is needed in the CCS.

How can I solve this issues? Please advice.

(Original source program thai is configred on MSPM0G3507 evaluation board is normally build and run on eva board.)

Kind regards

0 Ki over 1 year ago in reply to shotaro.tanaka

TI__Guru**** 451311 points

Tanaka-san,

It is best that the device/SDK experts investigate this issue. Please start a new thread since this is unrelated to the original topic.

Thank you

0 shotaro.tanaka over 1 year ago in reply to Ki

Prodigy 120 points

Hi-Ki-san

Thank you for advice.

OK, I'll try it.

As for this issue, I tried to make new project from the first time.

Make new project, make new .syscfg file. After saved .syscfg file, I found the error showed below. I cannot save .syscfg file, and sysconfg let me set CPU configuration again from the first time.

error05.pptx

Please advice me how can I solve this issue. Or should I ask to SDK expert?