LP-CC1352P7: Debug Console not working

Hi Baljeet,

Can you please try the uart2echo example (https://dev.ti.com/tirex/explore/node?node=ABnvVtmy4kK0t2XtJl.BTw__BSEc4rl__LATEST) to determine if this is a problem with the Wi-SUN setup or generally a problem with UART?

Regards,
Nikolaj

Hi Nikolaj,

uart2echo example works fine.

Thanks

Baljeet

Hi Baljeet,

What exactly are you referring to when you say "debug console". The debug console in CCS does not display UART data. Are you referring to the putty terminal?

Baljeet Bhatti said:

But there is not debug Console, can't see anything on debug console

Are you using the spinel-cli.py script to interact with the routers successfully?

Thanks,
Nikolaj

Hi Nikolaj,

Yes, I am using spinel-cli.py to communicate with BR project(<SDK_INSTALL_DIR>\examples\rtos\<DEVELOPMENT_BOARD>\ti_wisunfan\ns_br) and it is working.

but while running the RN (<SDK_INSTALL_DIR>\examples\rtos\<DEVELOPMENT_BOARD>\ti_wisunfan\ns_coap_node) I can't see the output in the serial terminal(i am using serial port utility). The configurations for the serial terminal are baud 115200, 8-bit data, 1 stop bit, no parity, and no flow control.

As per the documentation (https://dev.ti.com/tirex/explore/node?node=AOyWf5NMie7r58uZFkzxbA__BSEc4rl__LATEST) I should see

Thanks

Baljeet