Other Parts Discussed in Thread: SYSCONFIG
I am following:
When I try to select the european freq for TI 15.4 , I get the choice between 915 and 863 Mhz. I think for Europe this should be 868 Mhz ?
Thanks
Peter
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I am following:
When I try to select the european freq for TI 15.4 , I get the choice between 915 and 863 Mhz. I think for Europe this should be 868 Mhz ?
Thanks
Peter
Each channel is centered around a particular frequency. The OOB examples will select the least noisy channel to operate on from the channels enabled with the SysConfig tool.
Peter Vittali said:I am not sure to understand what you mean with "appropriate channel to tune to the correct freq"
I was mainly referring to regulatory compliance in the EU. I'm not too familiar in this area, but take a quick look at the following document for more info: http://www.ti.com/lit/an/swra048/swra048.pdf.
If you have any follow up questions regarding the document above, please let me know!
I apologize if I confused you in any way.