• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 46 subscribers
  • Views 1911 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/ADS131E08: Sample code requirement

silverdragon
Prodigy 100 points
Part Number: ADS131E08
Other Parts Discussed in Thread: ADS130E08EVM-PDK

Tool/software: Code Composer Studio

Hi,

I require a sample C CODE  for configuring the ADS131E08 in MSP430FR series. I have tried the link "ftp.ti.com/.../". The link is not working. The code can be sent to my registered email id.

With regards,

Siva A K

  • 0
    TI__Guru* 95205 points
    Siva,


    I'm checking in to the example code right now. In the last few months, we've redone the way that example code is distributed to follow export guidelines, so I can't just send the code via email.

    Let me see what options we have. Normally, I would have expected that there would be a link in the product page for the example code. In some cases, it is packaged with the EVM software, but the software for the ADS131E08EVM was done in LabView.

    Again, I'll look into it and post back soon.


    Joseph Wu
  • 0 in reply to Joseph Wu
    TI__Guru* 95205 points

    Siva,

    I've noticed that the firmware for the ADS130E08EVM is packaged up with the EVM software. This firmware can be used as example code, and the ADS131E08 is functionally the same. I believe there's also specific code for the ADS131E08 as well

    First go to the landing page for the ADS130E08EVM-PDK here:

    http://www.ti.com/tool/ADS130E08EVM-PDK

    Scroll down to the download for the software in the "Order Now" section.

    When you unpack the software, you can find code in the zipped firmware folder:

    I would note if you are already using a TI EVM, cancel the installation setup for the USBStyx driver. You only want to run this once, when you first start using our EVMs. Running this a second time removes the driver.

    Joseph Wu