EVM interface

Mark Wyville

Other Parts Discussed in Thread: DAC5682Z

I have a Stratix II FPGA development board that has two connectors for TI-EVM daughter cards. The connectors are labelled 'TI-EVM/FPDP' in the Altera documentation. I would like to know if this means I can connect the digital side of any of the ADC and DAC evaluation kits from TI.

I am particularly interested in the DAC5682z EVM , which has LVDS inputs. In the documentaiton on the TI website the corresponding connector type is termed 'semtek.' Can I connect this demo kit to my FPGA demo board with one of the TI-EVM connectors?

Mark

over 16 years ago

0 BrandonAzbell over 16 years ago

TI__Guru 63830 points

Assuming you are talking about the DK-DSP-2S60N DSP Development Kit, Stratix II Edition, this is designed to connect to a TI DSP EVM board with the TI-EVM/FPDP connectors. An example would be something like the TMS320C6711 DSK.

0 Mark Wyville over 16 years ago in reply to BrandonAzbell

Prodigy 50 points

Thanks for the response. That is the kit I am refereing to.

To confirm, I can only use the connectors for a TI DSP EVM board, but not a TI EVM board that has only DAC's and some analog components? (I was hoping to use better DAC's than the ones that came with the Altera development kit).

Mark

Data converters

Data converters forum

EVM interface