running ezdsp c5535 from ccs 3.3

siauhwa ong

I'm using ccs 3.3 and planning to use ezdsp c5535 stick. How can I setup th econfiguration ? what else do I need beside the driver ?

Is there any step by step instruction ?

thank you very much for the help.\

siauhwa

over 13 years ago

0 Ki over 13 years ago

TI__Guru**** 463901 points

Hello,

I don't believe CCSv3.3 supports the c5535 ezdsp. You will need to use v4 or greater.

Thanks

0 siauhwa ong over 13 years ago in reply to Ki

Expert 1510 points

on ccs 3.3 I found "create board option " under Code composer Studio setup -> connection property.

Isn't for creating a new target board ?

thank youi

Ki-Soo Lee said:

Hello,

I don't believe CCSv3.3 supports the c5535 ezdsp. You will need to use v4 or greater.

Thanks

ki

0 Ki over 13 years ago in reply to siauhwa ong

TI__Guru**** 463901 points

siauhwa ong said:

on ccs 3.3 I found "create board option " under Code composer Studio setup -> connection property.

Isn't for creating a new target board ?

Yes, but there is no support to create a new target board for your kit.

0 siauhwa ong over 13 years ago in reply to Ki

Expert 1510 points

hi,

can I use the same driver etc from the cd that comes with the ezdsp c5535 board ?

if yes, which file(s)?

thank you

Ki-Soo Lee said:

on ccs 3.3 I found "create board option " under Code composer Studio setup -> connection property.

Isn't for creating a new target board ?

Yes, but there is no support to create a new target board for your kit.

[/quote]

0 Ki over 13 years ago in reply to siauhwa ong

TI__Guru**** 463901 points

Since I believe the ezdsp c5535 kit comes with CCSv4, if you are asking if you can drop the files from v4 into CCSv3.3, I do not believe that would work.

Is there any reason why you wish to use v3 instead of v4?
Cancel
Up 0 True Down

Cancel
0 siauhwa ong over 13 years ago in reply to Ki

Expert 1510 points

i'm new to cc. And I found it very difficult to start up with ccs4....

Any hint..?

thank you

Ki-Soo Lee said:

Since I believe the ezdsp c5535 kit comes with CCSv4, if you are asking if you can drop the files from v4 into CCSv3.3, I do not believe that would work.

Is there any reason why you wish to use v3 instead of v4?
Cancel
Up 0 True Down

Cancel
0 Ki over 13 years ago in reply to siauhwa ong

TI__Guru**** 463901 points

The v4 getting started guide is a good place to start:

http://processors.wiki.ti.com/index.php/CCSv4_Getting_Started_Guide

Though note that CCSv5 is close to being released soon. v5 is recommended over v4.

Thanks

ki
Cancel
Up 0 True Down

Cancel

Code Composer Studio™︎

Code Composer Studio forum

running ezdsp c5535 from ccs 3.3