CC110L vs CC1101

Daniel Berenguer

Other Parts Discussed in Thread: CC110L, CC1101

Which are the main differences between the new CC110L and the old CC1101? I read the CC110L datasheet some days ago and I found no apparent differences with the old CC1101 IC. I'm just curious.

Thanks!

over 13 years ago

0 Chatto over 13 years ago

TI__Genius 12545 points

They are similar chips. However the CC110L has fewer features as compared to the CC1101. Also, the CC110L is lower cost.

0 Daniel Berenguer over 13 years ago in reply to Chatto

Expert 2185 points

Thanks for the quick reply.

Could you please give me an example about the fewer features? As for the lower cost, Mouser is selling this part at a higher price than the CC1101.

Thanks again!

0 Martin B over 13 years ago in reply to Daniel Berenguer

TI__Genius 12735 points

Hi Daniel

The following features are removed from the Value Line chips versus CC1101:

•Forward error correction (FEC) and interleaving

•Wake-on-Radio (WOR) and RCOSC (no RX timeout possible)

•Data Whitening

•Preamble quality threshold (PQT) indication (used to gate sync word detection)

•Link quality (LQI) indication (received signal strength (RSSI) is supported in Value Line parts)

•Temp sensor

•PA ramping and shaping

•MSK and ASK modulation (OOK modulation is supported in Value Line parts)

•No pin control for strobe commands (SPI strobe commands need to be used)

•ATEST removed

0 Daniel Berenguer over 13 years ago in reply to Martin B

Expert 2185 points

Thank you very much for the information.

Other wireless

Other wireless technologies forum

CC110L vs CC1101