Interrupt Profiling for TMS320F28335

SUNIL SAWANT

Intellectual 955 points

Other Parts Discussed in Thread: TMS320F28335

Hi All,

I am using TMS320F28335 MCU.

JTAG Emulator : C2000 XDS510LC USB.

IDE : Code Composer Studio v6.0.1

I want to perform interrupt profiling of my embedded application on above mentioned MCU.

Please suggest how can i perform interrupt profiling using above mentioned resources.

Thank you,

Sunil Sawant

over 10 years ago

0 Maria Todorova over 10 years ago

Guru 13185 points

Hello Sunil,

I think this thread can help you but there is no update for CCS6 yet.

If this one doesn't help, I think you can ask Lori to update by replying this thread

http://e2e.ti.com/support/microcontrollers/c2000/b/announcements/archive/2011/08/22/wiki-c28x-function-profiling

Best regards,

Maria

0 Gautam Iyer over 10 years ago

Guru 192875 points

Hi Sunil,

Additional to Maria's comments:
For interrupt profiling I normally use GPIO toggling technique. This is the best one... Setting GPIO and Clearing when required - observe the same on DSO. You get accurate results!

Regards,
Gautam

0 SUNIL SAWANT over 10 years ago in reply to Maria Todorova

Intellectual 955 points

Hi Maria,

Thank you for suggesting the links.

Regards,

Sunil Sawant

0 SUNIL SAWANT over 10 years ago in reply to Gautam Iyer

Intellectual 955 points

Hi Gautam,

Thank you for suggesting the alternate procedure for profiling.

Regards,

Sunil Sawant

C2000™︎ microcontrollers

C2000 microcontrollers forum

Interrupt Profiling for TMS320F28335

http://e2e.ti.com/support/microcontrollers/c2000/b/announcements/archive/2011/08/22/wiki-c28x-function-profiling