unsealed password

shahid essani

Dear sir

My company Name is "New tech Technology" I have repair batteries in dubai

I have unsealed procedure of bq20zxx and available some unsealed command, but some batteries was not unsealed. I thing different password, Can possible pro screen command 61 and 62 used in sealed mode and other solution to direct unsealed bq 20zxx please help me

My email address : essani_31@hotmail.com

thanks

shahid khan

over 13 years ago

0 ThomasCosby over 13 years ago

TI__Guru 73830 points

Shahid,

We do not have another method to unseal a pack, if the default unseal code has been replaced with a new code.

Regards
Tom

0 shahid essani over 13 years ago in reply to ThomasCosby

Prodigy 50 points

dear sir.

Thanks your reply

Please send me procedure default unseal code replaced with a new code

regards

shahid

0 ThomasCosby over 13 years ago in reply to shahid essani

TI__Guru 73830 points

Shahid,

The device has to be unsealed and in full access mode to change the UnSealKey. You simply write your new data to SMB Command 60 to replace the default UnSealKey. This procedure is discussed in the UnSealKey section of the TRM for the device that you are using. If UnSealKey on the the pack that you are trying to access has been changed from the default value, then you are not going to be able to access that pack without the new UnSealKey.

Regards
Tom

Power management

Power management forum

unsealed password