BQ40Z50-R1: SDK (dlls) for writing own application to program srec-file to bq40z50r1

Sigi Gassner

Part Number: BQ40Z50-R1

Hi,

for certain reasons i need to write a small application to program the srec-File to a bq40z50r1 with a EVM2400. Its due to a fully automated production-tool (calibrating etc.).

Does anybody know, where to get this SDK?

Thanks in advance

Sigi

over 7 years ago

0 Swaminathan Ramanathan75031 over 7 years ago

TI__Expert 6575 points

Hi Sigi,
We strongly recommend only writing the data flash memory as described in www.ti.com/.../slua743.pdf
Programming the complete srec is a much longer process and the risk of accidentally corrupting devices is much higher.
The SDK example is available for making your own software at e2e.ti.com/.../EV2300-Customer-Kit.zip
However, this tool is not supported by TI anymore.
Regards,
Swami

Power management

Power management forum

BQ40Z50-R1: SDK (dlls) for writing own application to program srec-file to bq40z50r1