Frequent Questions

  • [FAQ] MSP-EM-DESIGN-CENTER: Announcing the new Energy Measurement Design Center (EMDC) and Software Library for MSP430 MCUs!

    Part Number: MSP-EM-DESIGN-CENTER Other Parts Discussed in Thread: MSP430I2021 , MSP430I2031 , MSP430I2041 , MSP430F6736 , MSP430F6736A , MSP430F6779 , MSP430F67791 , MSP430F6779A , MSP430F67791A , EVM430-I2040S , EVM430-F6736 , Hello everyone, We…

  • [FAQ] E2E Search Advanced Tips and Tricks

    This thread contains E2E search tips and tricks. This should help users take better advantage of the capabilities that are available in the E2E Search feature.

  • [FAQ] TPS65311-Q1: VREG FET operation

    Part Number: TPS65311-Q1 Hi, When 5V is supplied to EXTSUP pin, how the VREG FET does operate(as regulator or Power SW)? I would like to know if "VREGDROP(=200mV[max])" is I*R drop. Best Regards, Kuramochi

  • [FAQ] TINA/Spice: LDO unencrypted models not importing to other tools - zx subcircuit missing

    Other Parts Discussed in Thread: TINA-TI Tool/software: TINA-TI or Spice Models Some of the LDO models that were recently released work fine in PSpice, but give a missing subcircuit warning when imported into other tools. How do I fix this?

  • [FAQ] Multiphase FAQ & Answers - TPS53647, TPS53667, TPS53681

    Other Parts Discussed in Thread: TPS53647 , TPS53667 , TPS53681 , TPS53622 , TPS53659 , TPS53679 Q1: How to properly turn off phases if you don’t need the max phase number? Pull the appropriate CSP line up to the controller supply voltage V3R3 to select…

  • [FAQ] TPS51200: Frequently Asked Questions and Answers

    Part Number: TPS51200 General Questions: Q: What types of DDR does TPS51200 support? A: TPS51200 supports DDR, DDR2, DDR3, DDR3L, LP DDR3 (Low power DDR3) and DDR4. Q: How to calculate the power dissipation on TPS51200. A: TPS51200 is a linear…

  • [FAQ] TPS51206: Frequently Asked Questions and Answers

    Part Number: TPS51206 General Questions: Q: What types of DDR does TPS51206 support? A: TPS51206 supports DDR2, DDR3, DDR3L, LP DDR3 (Low power DDR3) and DDR4. Q: How to calculate the power dissipation on TPS51206. A: TPS51206 is a linear…

  • [FAQ] Sticky: Enable XDS100 USB Serial Port on LAUNCHXL-F28069M

    Part Number: LAUNCHXL-F28069M The XDS100 USB Serial Port on some LAUNCHXL-F28069M boards may not be configured correctly. A symptom of this condition is that the USB Serial Port will not be identified by Windows. Below is a snapshot of an XDS100 USB…

  • [FAQ] DLP2000: DLP® LightCrafter™ Display 2000 Structured Light Code

    Part Number: DLP2000 Hello DLP® LightCrafter™ Display 2000 users! We have recently pushed a new code update to the BeagleBone Black Debian distribution for this EVM. This update provides some reference code and a program to enable structured light…

  • [FAQ] LM388X Frequently Asked Questions and Answers

    This document addresses most frequently asked questions fro the LM388X analog sequencer. Pleae read thist first to ensure that you questions are covered before posting. 5164.LM388X Frequently Asked Questions and Answers.pdf Thanks

View FAQ threads