Part Number: BQ78PL116 Other Parts Discussed in Thread: BQWIZARD Hello,
I am testing the Saft-3841MFE0400 battery (12V, 43Ah Super Phosphate), which has a BMS based around the BQ78PL116. I have found that as I log SMBus parameters during charge, the…
Part Number: BQ78350-R1 HI
In the attached file you can see at Colum Y that the Cycle count increment twice in one discharge cycle.
We are not writing to the BQ78350-R1.
Battery capacity : 5000mAH
We defined Cycle Count Percentage = 70% because…
Dear Dominik,
Thank you for your reply.
Yes, I recommended doing 2nd learning cycle to my customer, very carefully with QMax value.
and I have a question for another learning cycle.
in the datasheet of Li-ion cell, nominal capacity is 3450mAh…
Part Number: BQ27520-G4 Other Parts Discussed in Thread: BQSTUDIO , , GPCCHEM Hello, We have a new 3000 mAh battery. According to the datasheet of the battery, it is a li-ion battery and the charge voltage is 4.2 V, discharge voltage is 3.0 V. For decide…
meminfo(1).txt
HI liu
Txt is the data counted to meminfo. The limit is run time is 550 and Memory leak begins.
During runtime, MemTotal remains unchanged, corresponding to a larger used in free m, but the process's physical memory does not gr…
Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: BQSTUDIO I have completed the learning cycle and enabled Impedance Track™. It is found that the SOC curve is not smooth. What could be the reason for this? Is it related to the max DOD error reported…
Hii,
I tried to perform learning cycle but every time i stuck at the 4th cycle of relaxing battery where battery update status should change to 05 from 04. I am unable to do further procedure from here because update status is not changing to 05 from…
Hello Jeff,
Customer has disabled top off timer and result is the same. May we know if you can help to check the attachment for status from customer's board to see if there is anything missing. Thanks a lot!
/cfs-file/__key/communityserver-discussions…
