Part Number: ADC3642
Tool/software:
Hello ! I'm stil working with the ADC3642 and I have some interrogation about the input range of the ADC as working on single-ended mode. We use a input signal range range 0.3V to 1.5V but the results we got are…
Part Number: ADC3642 Tool/software: Hello,
I try to configure the ADC3642 to work with the following configuration but I encounter some issues ...
- Output mode DDR - Single ended clock - 14bit data - Sample rate 10MS/s - SPI SCK : ~2.5MHz
Please find below…
Part Number: ADC3642 Tool/software: Hello Again TI support Team,
I've been using this ADC in my design for a few months now, and just now noticed an issue that required special attention on signal delay(latency). When I look at the ADC output, I…
Part Number: ADC3642 Tool/software: Hi, all
Is it possible for ADC3642 in serial CMOS mode to provide DCLK_IN clock by simply connecting DCLK output to DCLK input?
Is it legal configuration, or I need to create DCLK-IN using external network form sampling…
Part Number: ADC3642 Hello,
I am using ADC3642 device in binary output format ( 0x8F and 0x92 = 02) and can see the format is correct. I am applying a 1V differential at the input. The problem I am having is that adc digital outputs swing to maximum…
Part Number: ADC3642 Hi,
I'm currently testing with the ADC3642 on my board and I'm having some issues. I intend on using the default configuration using pins only and have set REFBUF=0.6V.
Per DS, setting REFBUF = 0.6V sets VREF to internal reference…
Hi Nandith,
We don't have any reference material here. Please see pg. 25 of the datasheet: https://www.ti.com/lit/ds/symlink/adc3642.pdf
This provides the digital timing and format for the device so you can link it to the peripheral. Thanks!
Cheers…
Part Number: AM4372 Other Parts Discussed in Thread: ADC3643 , , AM3352 , ADC3642 , TIDA-01555 , ADC3660 , AM5728 Hi all
My customer is looking for a cost effective Sitara processor that can interface to the ADC3643 and they have this question:
Is the McASP…
