Part Number: ADC3664EVM Other Parts Discussed in Thread: ADC3669 , ADC3669EVM , TSWDC155EVM Hi
I can't connect to ADC3664EVM by ADC36xxEVM GUI.
Please teach me how to use.
Conditions, --Connect PC and A via USB cable --Input 12V from DC jack --Verify…
Part Number: ADC3664EVM Other Parts Discussed in Thread: ADC3664
Tool/software:
Dear Technical Support Team,
I installed sbac273.zip(HSDCPro Patch v5.00.06) and HSDC pro v6.0.
But HSDC shows following message. TI web provide only HSDC pro v6.0…
Part Number: TSWDC155EVM Other Parts Discussed in Thread: ADC3664EVM
hello,
I am looking for a Xilinx project or the HDL or Verilog files for the TWDC155EVM E-board to control the ADC3664EVM ADC board.
regards,
Part Number: ADC3664EVM Other Parts Discussed in Thread: ADC3644EVM , Tool/software: Dear Technical Support Team,
Accoriding to userguide, DCLK and Sampling clock input level should be ＋10dBm.
Which is correct to set sinewave(10dBm=2Vpp) or square…
Part Number: ADC3664EVM Hello，
One customer need to realize the below goal by changing EVM board.
He'd like to confirm if the DCLKIN and sample signal are both provided by FPGA, if he could still use GUI for configuration. He need 1-wire, decimation…
Part Number: ADC3664EVM Other Parts Discussed in Thread: ADC3664 , TSWDC155EVM Tool/software: The ADC3664 evaluation board seems to mate with the TSW1400 for testing. The TSW1400 uses an Altera FPGA.
The TSW1400 is obsolete - what capture card should…
Part Number: ADC3664EVM Other Parts Discussed in Thread: THS4541 Tool/software: The ADC3664EVM supports both AC and DC coupled inputs, and the guide for it says "By default, the EVM is configured to receive external inputs for the sampling clock and analog…
Part Number: ADC3664EVM Hello, the customer feedback that after the arrival of this part, the spectrum bottom noise test value is more than -50, which does not meet the specifications.
Please help to implement the situation, thank you.
Part Number: ADC3664EVM Other Parts Discussed in Thread: ADC3664 , Hi,
1. Regarding ADC3664, the absolute maximum rating of the AINP/M and BINP/M pins is 2.1V. It also states that the typical input common voltage is 0.95V and the input full-scale differential…
Part Number: ADC3664EVM Hi,
One of my customer wants to use ADC3664EVM to interface with their won FPGA board but ADC board is not showing any compatible FPGA board. We need part numbers of FPGA boards which are directly connect with FPGA board through…
